Operation Manual

First-time setup of your d evice
First-time setup of your devic
e
First- timese tupGettingstarted
Please read the chapter "Important notes", Page 11.
The necessary hardware drivers and the supplied software for the
device are already pre-installed.
Beforeyouswitchonthedeviceforthefirst time, connect it to the mains voltage
using the mains adapter, see "
Mains adapter connecting", Page 16.Themains
adapter must be connected during the en tire installation process.
A system test is performed when your device is first switched on. Various messages
can appear. The display may remain dark for a short time or may flicker.
Please follow the instructions on the screen.
NEVER switch off your device during the first-time setup process.
The battery is permanently installed in the system and mu st be charged if you
want to use your device under b attery operation.
When used on the move, the built-in ba ttery provides the device with th e necessary power. You
can increase the operating time by using the available energy-saving functions.
Please r efer to chapter "
Connecting ext ernal devices", Page 61 for instructions on how to
connect external devices (e.g. mo use, flash storage) to your device.
Unpacking and
checking the device
Should you discover any damage th at occurred during t ransportation,
notify your local sales outlet immediately!
► Unpack all the individual parts.
PackagingTransport
► Check your
device for any visible damage which m ay have occurred during transportation.
You may n e
ed the packaging in the fu ture, if you need to transport your device.
Fujitsu 15