Instruction Manual
48
- Getting Started with Android
8 Switch your tablet off by one long press of the ON/OFF switch and confirm the question on the shut down
with
OK
.
9 Switch your tablet on again.
10 When you see the Android logo on the screen, press the ON/OFF switch and the volume button (increase volume)
and keep them pressed for 2 seconds and then release
t
hem.
After a few seconds you reach the restore mode.
11
Select
wipe data/factory reset
.
12 Follow the instructions on the screen to perform the system update. After the system update has completed,
you will be in the restore mode again.
13 Select
Reboot system now
to finish the system update.
IF THE FUJITSU LOGO APPEARS ON THE SCREEN, THEN YOU HAVE NOT REACHED THE RESTORE MODE. REPEAT THE ABOVE STEP UNTIL YOU
REACH THE RESTORE MODE.
N
AVIGATE AS FOLLOWS THROUGH THE MENU:
• VOLUME BUTTON (INCREASE VOLUME) TO SELECT AN OPTION ABOVE THE CURRENT OPTION
• VOLUME BUTTON (DECREASE VOLUME) TO SELECT AN OPTION BELOW THE CURRENT OPTION
• ON/OFF SWITCH TO CONFIRM THE SELECTION