Copyright & Trademark Information Fujitsu Computer Systems Corporation has made every effort to ensure the accuracy and completeness of this document. Because ongoing development efforts are continually being made to improve the capabilities of our products, however, the data contained herein represents Fujitsu design objectives and is provided for comparative purposes; actual results may vary based on a variety of factors. This product data does not constitute a warranty.
Stylistic CT2000 Series CE Tablet - User’s Guide NOTICE Changes or modifications not expressly approved by Fujitsu could void this user’s authority to operate the equipment. FCC NOTICES Notice to Users of Radios and Television These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Ta b l e o f C o n t e n t s Stylistic® CT2000 Series CE Tablet Table of Contents PREFACE About This Guide . . . . . . . . . . . . . . . . . . . . . . . . . 4 Fujitsu Contact Information . . . . . . . . . . . . . . . . . 4 Warranty Information . . . . . . . . . . . . . . . . . . . . . 4 3 USING THE TABLET SOFTWARE 1 Using the Stylistic CT2000 Series CE Tablet Software GETTING STARTED Getting Started with Your Stylistic CT2000 Series CE Tablet In-Box Items for the CE Tablet . . . . . . . . . . . . . .
Stylistic CT2000 Series CE Tablet User’s Guide 6 8 TROUBLESHOOTING/FAQS GLOSSARY Troubleshooting Glossary. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 User Response to Messages . . . . . . . . . . . . . . . . 37 Error Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 FAQs Frequently Asked Questions (FAQs). . . . . . . . . .
Preface 3
Stylistic CT2000 Series CE Tablet User’s Guide – Preface Preface ABOUT THIS GUIDE The Stylistic® CT2000 Series CE Tablet is a versatile, pen-based computer that has been designed to run the Microsoft®Windows® CE .NET, v4.2 operating system. This manual explains how to operate your Fujitsu Stylistic CT2000 Series CE Tablet’s hardware and builtin system software. The Stylistic CT2000 Series CE Tablet is a completely self-contained unit with an active-matrix (TFT) color LCD display and a passive digitizer.
1 Getting Started with Your Stylistic CT2000 Series CE Tablet 5
Stylistic CT2000 Series CE Tablet User’s Guide – Section One Getting Started with Your Stylistic CT2000 Series CE Tablet PWR PWR 1 2 3 4 5 6 0 ENT 7 8 9 CLR CLR BKS F1 F2 F3 F4 F4 Figure 1-1. Stylistic CT2000 Series CE Tablet The Stylistic® CT2000 Series CE Tablet is a versatile, pen-based computer that has been designed to run the Microsoft®Windows® CE .NET V4.2 operating system. This chapter provides an overview of the Stylistic CT2000 Series CE Tablet and its features.
Getting Started OPTIONAL ACCESSORIES The following optional accessories can be used with the Stylistic CT2000 Series CE Tablet. For part numbers and ordering information, go to the Fujitsu Web site at: us.fujitsu.com/computers; the list is updated frequently. Refer to the instructions provided with these accessories for details on their use.
Stylistic CT2000 Series CE Tablet User’s Guide – Section One STYLISTIC CT2000 SERIES CE TABLET FEATURES Features and controls that you use to operate the Stylistic CT2000 Series CE Tablet are outlined below and illustrated in Figures 1-2 through 1-8. Details on using these features and controls are provided later in this manual. WLAN Antenna (inside system) PWR PWR 1 2 3 4 5 6 0 Color LCD Display ENT 7 8 9 Key/Button Pad CLR CLR BKS F1 F2 F3 F4 F4 Speaker Built-in Microphone Figure 1-2.
Getting Started Pen Holder (inside system) Bridge Battery Battery Release Latch Power On/Off Switch (Under Battery) Handstrap Attachment Points Spring-loaded Battery Release Latch CF Removable Battery RESET Reset Button Figure 1-3. Stylistic CT2000 Series CE Tablet Features (Back View) Back Features: • Removable battery: Can be removed and replaced with a charged battery. (See Removing a Battery Pack on page 18 for more information.
Stylistic CT2000 Series CE Tablet User’s Guide – Section One PC Card Slot Barcode Scanner Port Pen Holder Figure 1-4. Stylistic CT2000 Series CE Tablet Features (Top Side View) Top Side Features: 1 The ports and connectors on the sides of the tablet are protected by covers. Some of the covers are secured with small Philips screws; the others are protected by rubber flaps. If you remove a cover that is secured with a screw, retain the cover and hardware in a safe place for later reinstallation.
Getting Started The CF card slot does not have an eject button, so be sure to only use cards that are long enough to extend from the CF card slot or to use an adhesive “H” tab included with the system. (See Compact Flash Slot on page 19 for more information.) USB Port Audio Jack Compact Flash (CF) Slot Battery Pack Figure 1-6. Left Side View Left-Side Features: 1 • USB port: Allows you to connect Universal Serial Bus devices (USB Standard Revision 1.1) to the tablet.
Stylistic CT2000 Series CE Tablet User’s Guide – Section One KEY/BUTTON PAD The Stylistic CT2000 Series CE Tablet has a handy key/ button pad that can be used for performing a variety of functions. Reference Figure 1-8. for the location of the various indicators, keys, and buttons; reference Table 11. and Table 1-2. for a description of each item.
Getting Started CONNECTORS, BUTTONS, AND PERIPHERAL INTERFACES Connectors and peripheral interfaces on the Stylistic CT2000 Series CE Tablet allow the connection of a variety of devices. Specific locations are illustrated in Figures 1-2 through 1-5. Connector/ Peripheral Tablet Icon Table 1-3 provides a description of each peripheral connector and buttons on the Stylistic CT2000 Series CE Tablet. Each of the illustrated icons is either molded into or printed on the tablet chassis.
2 Using Your Stylistic CT2000 Series CE Tablet 14
U s i n g Yo u r S t y l i s t i c C T 2 0 0 0 Using the Stylistic CT2000 Series CE Tablet This chapter covers the fundamental concepts, basic system operation and use, and system functions of the Stylistic CT2000 Series CE Tablet. You should familiarize yourself with this information before you attempt to operate the system. BEFORE SETTING UP THE TABLET Before you set up your tablet, there are two important steps to perform: • The display can be damaged with improper use.
Stylistic CT2000 Series CE Tablet User’s Guide – Section Two SUSPENDING/RESUMING THE SYSTEM • The warranty does not cover a screen that is scratched as a result of not using a screen protector. We strongly recommend that you install a screen protector on your system. Screen protectors are available as optional accessories for your tablet. (For part numbers and ordering information, go to the Fujitsu Web site at: us.fujitsu.com/ computers.
U s i n g Yo u r S t y l i s t i c C T 2 0 0 0 Pen calibration may be required due to the following situations: • The pen is being used for the first time. • The previous user of the tablet writes with the opposite hand or at a different pen angle. • The system has been in use for some time and the pen has not been calibrated. 2. Select either 800x600 or 1024x768, depending upon your preference. 3. If you change the settings, you will be prompted that you must reboot your system. Click [Yes].
Stylistic CT2000 Series CE Tablet User’s Guide – Section Two If the program file you want to launch is hidden, go to Start -> Program -> Explorer -> View -> Options to see the options selected in the Folder Options dialog. For example, if you want to open WordPad whenever you press [F4], first you would open the Button Property window by clicking [Start] -> Settings -> Control Panel and double-clicking the Buttons icon. Next, you would click the [...] on the Button4 line.
U s i n g Yo u r S t y l i s t i c C T 2 0 0 0 Note that if any of the three states is set to “Never”, the system will never suspend automatically. • Reduce the backlight brightness using the brightness button or using the Backlight selection in the Control Panel (reference the section of this chapter entitled “Adjusting the Display Brightness” on page 17.) • Shorten the amount of time before the backlight decreases in the Control Panel -> Display -> Backlight window.
Stylistic CT2000 Series CE Tablet User’s Guide – Section Two The CF card slot does not have an eject button, so try to use cards that are long enough to extend from the CF card slot. In the event that is not possible, use one of the adhesive “H” tabs that were included with the system. To use an “H” tab, perform the following steps: • Make sure you apply the tab to the end of the card that will be held when the card is inserted (i.e, the end without the connector).
3 Using Your Stylistic CT2000 Series CE Tablet Software 21
Stylistic CT2000 Series CE Tablet User’s Guide – Section Three Using the Stylistic CT2000 Series CE Tablet Software Your Stylistic CT2000 Series CE Tablet comes pre-loaded with a variety of valuable software. This chapter provides an overview of the CE Tablet software; for detailed information about installing and using the software, refer to Appendix A of this document.
U s i n g Yo u r Ta b l e t S o f t w a r e • Before attempting to synchronize the tablet with the host computer, you must power up the tablet before inserting it into the tablet dock. • Be sure to insert the tablet carefully in the dock. Failure to align the interface connectors could result in synchronization problems. To Launch ActiveSync Automatically On the tablet desktop go to Start -> Settings -> Control Panel and click on the PC Connection icon.
Stylistic CT2000 Series CE Tablet User’s Guide – Section Three ■ mation. This icon also allows you to allocate the amount of memory used for storage and for programs. USING THE FUJITSU SETUP MENU System Information: The System Information utility provides detailed information about your tablet’s Bootloader, CPU, and system image. To access the Setup menu, first reset the system by lightly pressing the Reset button on the back of the system using the tip of your pen (see Figure 1-3.
4 Wireless LAN User’s Guide 25
Stylistic CT2000 Series CE Tablet User’s Guide – Section Four FCC REGULATORY INFORMATION Please note the following regulatory information related to the wireless LAN module. Regulatory Notes and Statements Wireless LAN, Health and Authorization for use Radio frequency electromagnetic energy is emitted from wireless LAN devices. The energy levels of these emissions, however, are far much less than the electromagnetic energy emissions from wireless devices such as mobile phones.
W i r e l e s s L A N U s e r ’s G u i d e Before Using the Wireless LAN This manual describes the basic operating procedures for the wireless LAN (referred to as the “device” in this manual) and how to set up a wireless LAN network. Before using this device, read this manual carefully to ensure correct operation of the device. Keep this manual in a safe place for reference while using the device.
Stylistic CT2000 Series CE Tablet User’s Guide – Section Four Figure 4-2. Access Point (Infrastructure) Mode Network Wired LAN Internet ADSL modem, cable modem, or similar Access Point* Wireless LAN * An optional hub for a wired LAN may be required depending upon the type of access point used. FOR BETTER COMMUNICATIONS STARTING TRANSMISSION This personal computer may not operate properly due to the operating environment.
W i r e l e s s L A N U s e r ’s G u i d e DISABLING/RE-ENABLING THE WLAN If you do not intend to use the wireless LAN device in your tablet, it is recommended that you disable it. Do not disable the WLAN unless you have no intention of using it. In the process of reenabling it, you will lose any RAM-based data and applications. Disabling the WLAN To disable the wireless LAN device, go to Start -> Programs -> Explorer and double-click on the Windows icon. The double-click on the NoWLAN.exe file to run it.
Stylistic CT2000 Series CE Tablet User’s Guide – Section Four Connection using Windows CE .NET FLOW OF OPERATIONS The wireless LAN connection procedure contained in this section is outlined below. 1. Make sure the mobile computer is ready for the transmission of radio waves from the wireless LAN. For further details, see (See Starting Transmission on page 28 for more information.). 2. Assign the parameters required for wireless LAN connection. (See Preparation for a New Wireless LAN Connection, below.
W i r e l e s s L A N U s e r ’s G u i d e If checked, clear the check mark from the [The key is provided automatically] check box. c. Enter data in Network key: Depending on the number of entered characters or digits, whether the key is an ASCII character code or a hexadecimal code will be identified automatically. ■ ■ Use five or thirteen characters to enter the key in the ASCII character code format.
5 Care and Maintenance 32
Care and Maintenance Care and Maintenance This chapter gives you pointers on how to care for and maintain your Stylistic CT2000 Series CE Tablet. CARING FOR YOUR TABLET We highly recommend that you install a screen protector on your tablet. Screen protectors are available as optional accessories for your tablet. (For part numbers and ordering information, go to the Fujitsu Web site at: us.fujitsu.com/computers.) Be sure to use only screen protectors that are designed for your tablet.
Stylistic CT2000 Series CE Tablet User’s Guide – Section Five 3. Apply the screen protector to the display surface. When doing so, orient the screen protector with the adhesive side of the screen protector facing the display and the notched corner of the screen protector oriented as shown in Figure 5-2.
6 Troubleshooting and FAQs 35
Stylistic CT2000 Series CE Tablet User’s Guide – Section Six Troubleshooting Solutions to some common problems are described in the following sections. If you are experiencing a problem with your Stylistic CT2000 Series CE Tablet that you cannot solve by taking the actions described, contact your local help desk or reseller, or call Fujitsu Service and Support at 1-800-8Fujitsu (1-800-838-5487) for further assistance.
Troubleshooting and FAQs USER RESPONSE TO MESSAGES If at any time you receive one of the following messages, take the action described in the following table. Message Cause User Response “Main batteries very low” The main battery charge is too low. Either replace the main battery or charge the main battery using the battery charger or cradle. See “Charging the Battery Pack” on page 18. “Low backup battery” The backup battery charge is too low. Charge the backup battery.
Stylistic CT2000 Series CE Tablet User’s Guide – Section Six ERROR CODES Occasionally, it may be necessary to restore specific applications. Ordinarily, the restored operating environment become effective after the system is restarted. If for some reason the application program cannot be restored automatically, you may receive a restoration failure error message (Figure 5-1). For the cause of the error, see the table that follows.
Troubleshooting and FAQs Error code Name Error -126 VALUE_NAME_ERROR The registry name that was read is invalid. -127 VALUE_DATA_ERROR The registry information that was read is invalid. -131 NOT_FIND_CONFIG The setting file was not found. -132 NOT_FIND_SYSTEMREG The system registry file was not found. -133 NOT_CREATE_STARTUP Startup shortcut cannot be created. -134 NOT_BACKUP_FILE The file cannot be backed up. -141 NOT_APP_INSTALL No applications are installed.
Stylistic CT2000 Series CE Tablet User’s Guide – Section Six FREQUENTLY ASKED QUESTIONS (FAQS) The following list contains answers to some of the most frequently-asked questions pertaining to the Stylistic CT2000 Series CE Tablet. What is the difference between CE .NET 4.2, Pocket PC 2002 and Windows for Mobile 2003? CE .NET 4.2 is the version of the Windows CE operating system installed on the Stylistic CT2000 Series CE Tablet. Pocket PC 2002 is based on the older version of CE, version 3.0.
Troubleshooting and FAQs Do I need to download any additional software to develop applications using Visual Studio 2003? Yes. You need to download and install the CE Utilities for VS. NET 2003 Add-on Pack v.1.1. This updates the files for smart device development and adds an option for connecting to the ARMV4I processor through the VS.NET IDE using ActiveSync. Can I use Visual Studio 2002 to develop CE.NET applications? No. VS 2002 does not support smart device development.
7 Specifications 42
System Specifications Stylistic CT2000 Series CE Tablet Hardware Specifications The following table provides hardware specifications of the Stylistic CT2000 Series CE Tablet by category. Stylistic CT2000 Specifications (Continued) Stylistic CT2000 Specifications Audio • AC’97-compliant with internal speaker and microphone Physical Specifications • Audio jack: 2.5 mm diameter, 3 pole, for external headset Dimensions 8.07" w x 11.4" h x 0.98" d (205 mm x 290 mm x 25 mm) Weight 2.20 lbs.
Stylistic CT2000 Series CE Tablet User’s Guide – Section Seven Stylistic CT2000 Specifications (Continued) Bridge Battery Stylistic CT2000 Specifications (Continued) • Manganese Dioxide Lithium Environmental Specifications • 3.0V, 65 mAh AC Adapter • Life (with Suspend-to-RAM on bridge battery only): approximately 10 minutes from full charge Temperature Autosensing 100 - 240V, 50/60 Hz, supplying 12 VDC, with a current of 2.
8 Glossary 45
Stylistic CT2000 Series CE Tablet User’s Guide – Section Eight Glossary AC adapter An adapter that provides external power (not battery power) to your Stylistic CT2000 Series CE Tablet. Access point A designation of wireless LAN network configurations. It indicates a form of communication using an Access Point. For details, refer to “access point connection” on page 27.
GLossary for those computers whose IP addresses are unknown, if their names are known, it is possible to communicate with them. download The process of transferring data from your desktop computer to your Stylistic CT2000 Series CE Tablet. e-mail Messages and other items that you send and receive with Inbox. Explorer window The window that appears when you double-click a device icon in the Mobile Devices window.
Stylistic CT2000 Series CE Tablet User’s Guide – Section Eight correctly receive data, normal communications can be restored by setting the size of MTU to a smaller value. My Documents folder The folder that stores files you create on your tablet. You can view the contents of this folder in the Explorer window in Windows CE Services. Network authentication The method of authentication performed by wireless LAN clients to connect with the access point.
GLossary reset Depending on the state of your Stylistic CT2000 Series CE Tablet, a process that either causes the system to reboot or erases all data stored in RAM. restore To return your Stylistic CT2000 Series CE Tablet to the state it was in when it was backed up. This involves copying your backup data to your tablet. serial cable A cable to connect your tablet to your desktop computer. Shared key authentication An 802.11 wireless LAN authentication method.
Appendix Installing and Using the Software 50
U s i n g Yo u r Ta b l e t S o f t w a r e Installing and Using the CE Tablet Software INSTALLATION The instructions contained in this section are designed for implementation by advanced users, administrators, and/or IT personnel. Preparations for installation The following preparations are required before programs can be installed in this device. 1. Create an installation setup file Before programs are installed, definitions for them must be created. Define the installation setting (Config.
Stylistic CT2000 Series CE Tablet User’s Guide – Appendix 3. Specify the name of the application program to be started in Startup. A shortcut for the program specified here is created in Startup. Format: [StartUp] FileName=startup-program-file-name [parameter] END Be sure to specify the name of the application program to be started in Startup with an installation destination path name. If the program file name and its path name contain any spaces, specify them enclosed in double quotation marks ("").
U s i n g Yo u r Ta b l e t S o f t w a r e Installing the program from a storage card 1. Verify that the Fujitsu Setup menu is open 2. Tap the [Install an Application] button. 3. Check the Storage Card checkbox, then click [Next]. 4. Enter the name of the folder where you placed the installation file (config.hht) in the Folder box. You can use [Browse] to navigate to the location. 5. Tap [Next] to start installation.
Stylistic CT2000 Series CE Tablet User’s Guide – Appendix DEVICE PROPERTIES Initializing the Tablet 1. Open the Fujitsu setup menu by holding the [CLR] button while warm-booting the system (i.e., pressing the small recessed reset button on the back of the system). 2. Tap the [Device Property] button, then select the Initialize tab. 3. Check whether you want to initialize all settings or only selected items (Flash Disk or RAM). 4. Press the [Initialize] button.
U s i n g Yo u r Ta b l e t S o f t w a r e Creating a registry value The registry editor can be used to create a new registry value. 1. Select the key for which a value is to be created in the upper pane and tap the [New Value] icon (it looks like a checkbox) on the menu bar. 2. Enter the name and content of the value to be created. 3. Select the format of the value to be created. 4. Tap the [OK] button to create the new value.
Stylistic CT2000 Series CE Tablet User’s Guide – Appendix 2. Tap the [Run a program] button. 3. Enter the file name of the file to be executed. You can also navigate to the file using the [Browse] button. When memory has been erased after installing an application, a dialog appears notifying you that the contents of memory has been lost. 4. Tap the [OK] button to execute the specified file.
U s i n g Yo u r Ta b l e t S o f t w a r e TERMINAL SERVICE SETTING • Prior to using the Remote Desktop Protocol, you must first configure the Terminal Service Settings which can be accessed by double-clicking on the Terminal Service Setting icon in the Control Panel. • If the server is not configured, the system will suspend. Double tapping the “Terminal service setting” icon in the system control panel opens the Terminal Service Setting Properties window.
Stylistic CT2000 Series CE Tablet Index Symbols Creating an installation setup file . . . . . . . . . . . . . . . .51 .NET Compact Framework . . . . . . . . . . . . . . . . . . . . 40 CT2000 powering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18 resetting the system . . . . . . . . . . . . . . . . . . . . . . . . .16 A About This Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 cursor not tracking pen . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Index M S Meory erased . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56 serial port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10 Microsoft Transcriber . . . . . . . . . . . . . . . . . . . . . . . . . 40 Setting the restoration process . . . . . . . . . . . . . . . . . . .54 Microsoft Visual Studio .NET 2003 IDE . . . . . . . . . . 40 Setting the system font . . . . . . . . . . . . . . . . . . . . . . . . .54 shutting down the system . . . . . . . . . .
Stylistic CT2000 Series CE Tablet W warranty information . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Windows CE.NET Edition . . . . . . . . . . . . . . . . . 4, 6, 44 Windows for Mobile 2003 . . . . . . . . . . . . . . . . . . . . . 40 Wireless LAN Ad Hoc Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . before using . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . connection using Windows XP . . .
