User Guide

4-8 SPARC Enterprise Mx000 Servers Dynamic Reconfiguration User’s Guide • September 2007
4.3 Example: Deleting a System Board
This section provides an example of operation to delete a system board from a
domain. In the example, a procedure conforming to Section 4.1.2, “Flow: Deleting a
System Board” on page 4-3, is used, and the system board shown in the figure is
deleted using the XSCF shell.
FIGURE 4-6 Example: Deleting a System Board
1. Login to XSCF.
2. Check the status of the domain.
Execute the showdcl(8) command to display domain information, and then
check the operation status of the domain. Based on the operation status of the
domain, determine whether to perform the DR operation or change the domain
configuration.
XSCF> showdcl -d 0
DID LSB XSB Status
00 Running
00 00-0
01 01-0
Domain#0
Delete
XSB#00-0
XSB#01-0
Domain#0
XSB#00-0
XSB#01-0