User Guide

Chapter 3 DR User Interface 3-13
■ Example: Display of device information on XSB00-0
3.1.5 Displaying System Board Configuration
Information
Use the showfru(8) command to display system board configuration information.
The showfru(8) command displays information about the PSB division type and
memory mirroring mode settings in list format.
To change the PSB configuration, use the setupfru(8) command.
The following examples show the format and options of the showfru(8) command.
XSCF> showdevices 00-0
CPU:
----
DID XSB id state speed ecache
00 00-0 0 on-line 2048 4
00 00-0 1 on-line 2048 4
Memory:
-------
board perm base domain target deleted
remaining
DID XSB mem MB mem MB address mem MB XSB mem MB
mem MB
00 00-0 8192 2048 0x000003c000000000 65536
I/O Devices:
----------
DID XSB device resource usage
00 00-0 sd0 /dev/dsk/c0t0d0s0 mounted filesystem “/”
00 00-0 sd0 /dev/dsk/c0t0d0s1 swap area
00 00-0 sd0 /dev/dsk/c0t0d0s1 dump device (swap)
00 00-0 bge0 SUNW_network/bge0 bge0 hosts IP addresses:
10.1.1.1
showfru -a device
showfru device location
showfru -h