User Guide

3-1
CHAPTER
3
DR User Interface
This chapter describes the user interfaces for DR.
3.1 How To Use the DR User Interface
XSCF provides two user interfaces for DR: the command line interface by XSCF
shell, and the browser-based user interface by XSCF Web.
This section describes the main XSCF shell commands used for DR. For other related
commands, see Section 3.2, “Command Reference” on page 3-25. For XSCF Web, see
Section 3.2, “Command Reference” on page 3-25 and Section 3.3, “XSCF Web” on
page 3-27.
XSCF shell commands for DR operations are classified into two types: DR display
and DR operation commands.
TABLE 3-1 DR Display Commands
Command name Function
showdcl Display the DCL and domain status.
showdomainstatus Display domain status.
showboards Display system board information.
showdevices Display information about the CPUs, memory, and I/O devices on
system boards.
showfru Display PSB configuration information.