User Guide

2-18 SPARC Enterprise Mx000 Servers Dynamic Reconfiguration User’s Guide • September 2007
XSCF manages the following aspects of domain status:
To perform a DR operation for a system board, you must determine the method of
DR operation according to the status of the relevant domain. The conditions of
domain status available for DR operation are described in individual sections of
Chapter , DR User Interface. For details of each method used for DR, see the relevant
section.
2.4.2 System Board Status
XSCF manages system board status in units of XSB for the following management
items:
TABLE 2-2 Domain Status
Status Description
Powered Off Domain power is off.
Initialization Phase POST processing or OpenBoot PROM initialization is in progress.
OpenBoot Executing
Completed
Initialization of OpenBoot PROM is completed.
Booting Solaris OS is being booted or, due to the domain being shutdown or
reset, the system is in the OpenBoot PROM running state or is
suspended in the OpenBoot PROM (ok prompt) state.
Running Solaris OS is running.
Shutdown Started Solaris OS is being shut down.
Panic State Solaris OS has panicked.
TABLE 2-3 System Board Management Items
Management item Description
Power Power on/off status of system board
Test Diagnostic status of system board
Assignment Status of assignment to domain
Connectivity Status of connection to domain
Configuration Status of addition into Solaris OS