User Guide

4-22 SPARC Enterprise Mx000 Servers Dynamic Reconfiguration User’s Guide • September 2007
4.6.2 Example: Reserving a System Board Delete
FIGURE 4-11 Example: Reserving a System Board Delete
1. Login to XSCF.
2. Check the status of the domain.
Execute the showdcl(8) command to display domain information, and then
check the operation status of the domain. Based on the operation status of the
domain, determine whether to perform the DR operation or change the domain
configuration.
3. Check the status of the system board to be deleted.
Execute the showboards(8) command to display system board information, and
then check the status of the system board to be deleted.
4. Reserve the deletion of the system board.
Execute the deleteboard(8) command to reserve deletion of the system board.
XSCF> showdcl -d 0
DID LSB XSB Status
00 Running
00 00-0
01 01-0
XSCF> showboards 01-0
XSB DID(LSB) Assignment Pwr Conn Conf Test Fault
------------------------------------------------------------------
01-0 00(01) Assigned y y y Passed Normal
XSCF> deleteboard -c reserve 01-0
Delete
Domain#0
XSB#00-0
XSB#01-0
Domain#0
XSB#00-0
XSB#01-0