User Guide

4-10 SPARC Enterprise Mx000 Servers Dynamic Reconfiguration User’s Guide • September 2007
4.4 Example: Moving a System Board
This section provides an example of an operation to move a system board between
domains. In the example, a procedure conforming to Section 4.1.3, “Flow: Moving a
System Board” on page 4-4, is used, and the system board shown in the figure is
moved using the XSCF shell.
FIGURE 4-7 Example: Moving a System Board
1. Login to XSCF.
2. Check the status of the move-source domain.
Execute the showdcl(8) command to display domain information, and then
check the operation status of the move-source domain.
XSCF> showdcl -d 0
DID LSB XSB Status
00 Running
00 00-0
01 00-1
Domain#0
XSB#00-0
XSB#01-0
XSB#00-1
Domain#1
Move
Domain#0
XSB#00-0
XSB#01-0
XSB#00-1
Domain#1