Owner manual

64 ServerView Event Manager
Mail and Execute forwarding to the service provider
You can enable or disable this configuration with the Enabled option.
The Mail Properties tab provides fields for the mail server. The mail server is an
SMTP server.
I With alarm forwarding in ServerView V6.20 or later, MAPI is no longer
supported. Only SMTP servers are still used. If during an upgrade the
mail service is addressed via MAPI, a warning is issued. During the
setup, all MAPI destinations are changed to SMTP. The settings for the
SMTP server must then be configured in the Alarm Configuration
component.
The input fields in the Mail Properties window have the following meanings:
Name Meaning
From Sender (SMTP)
Server SMTP server (SMTP)
User (optional) User name (SMTP)
Password
(optional)
Identification of the mailing system
(optional with SMTP)
Confirm
Password
(optional)
Confirm the password
(optional with SMTP)
Port Port number (SMTP)
The default value is Port 25
Table 9: Input fields in the Mail Properties window