Owner manual

4. The default publication setting for L-Platform templates is "Hidden".
If you want to publish an L-Platform template, the L-Platform template publication setting command (cfmg_showtemplate) must
be used to change the publication setting.
Refer to "9.15 cfmg_showtemplate (Changing L-Platform Access Setting)" in the "Reference Guide (Command/XML) CE" for
information on this command.
Note
- There is no effect on deployed L-Platform even if the publication settings of the L-Platform template being used by a deployed L-
Platform are changed to "Hidden".
- If it is ever necessary for deployment to be canceled, it is possible to change the setting for the L-Platform template for that deployment
to "Hidden".
A.2 Deleting L-Platform Templates
This section explains the procedure for deleting L-Platform templates using commands.
Refer to "Chapter 9 L-Plartform Template Management Commands" in the "Reference Guide (Command/XML) CE" for information on
the different sets of information and the commands.
A.2.1 Procedure for Deleting L-Platform Templates
The Infrastructure Administrator can delete information as required.
1. Template Information
2. Segment Information
3. Image Information
4. Software Information
Note
- If the following information is associated with multiple template information files, delete all the associated template information files
before deleting the other information files.
- Image information files
- Segment information
- Before deleting a software information file, delete all of the associated image information files.
- Do not delete template information that are being used in a deployed L-Platform.
Point
Do the following to check whether the commands have correctly deleted the information.
- Check the return value.
A return value of 0 indicates normal termination.
A return value of anything other than 0 indicates an error and an error message will be output. Or,
- Use the following commands to display the corresponding information.
- 146 -