Technical data

TX300 S5 Operating manual 59
Hardware installation Installing/removing the rack model
4.3.4 Installation in 3rd party racks
The procedure for installing in 3rd party racks is basically as described in "Instal-
lation in PRIMECENTER/DataCenter rack" on page 47 (the support bracket
and cable management are not installed). The following parts are required:
– One support system on the left and one on the right (pre-mounted)
– Possibly an articulated cable guide
– Possibly protective hose for fiber channel fiber optic cable
Ê Refer to the manual from the rack manufacturer for details of the mechanical
installation and the climatic conditions.
V CAUTION!
When installing in 3rd party racks, it must be ensured that an air flow
from the front to the back of the rack is guaranteed.
I Sometimes a number of parts of the delivered mounting kit cannot be
used because original parts of the 3rd party rack are to be used.
Ê Insert the server (see section "Inserting the server" on page 49).
Ê Route the cables as described in the original rack manual.