Technical data

TX300 S5 Operating manual 41
Hardware installation Setting up the floorstand model
– Ensure that there is enough unobstructed area around the server
for operating and servicing the device (see "Maintenance area for
the floorstand model" on page 21).
– Access to the rear of the server must be assured so that other
devices (e.g. memory subsystems) can be connected.
– The mains plug must be accessible easily and safely.
– A clearance of at least 200 mm must be maintained in front of and
behind the system to ensure proper ventilation.
Ê Wire the server. Read the information in section "Connecting devices to the
server" on page 60 and section "Notes on connecting/disconnecting cables"
on page 64.
Ê Connect the system to the mains (see section "Connecting the server to the
mains" on page 61).