Technical data

40 Operating manual TX300 S5
Unpacking the server Hardware installation
4.1 Unpacking the server
V CAUTION!
Follow the safety instructions in chapter "Important information" on
page 25.
The server must always be lifted or carried by at least two people.
Do not unpack the server until it is at its installation location.
Ê Transport the server to the place where you want to set it up.
Ê Unpack all individual parts.
Keep the original packaging in case you want to transport the server again.
Ê Check the delivery for any damage during transport.
Ê Check whether the items delivered match the details on the delivery note.
The product name and serial number of the product can be found on the ID card.
Ê Notify your supplier immediately should you discover that the items delivered
do not correspond to the delivery note.
4.2 Setting up the floorstand model
I If you are not installing a PRIMERGY TX300 S5 floorstand model, skip
this section and continue reading at section "Installing/removing the rack
model" on page 42.
V CAUTION!
Please note the safety instructions in chapter "Important information" on
page 25
Ê Transport the server to the place where you want to set it up.
Ê Unpack the server (see section "Unpacking the server" on page 40).
Ê Set up the server.
V CAUTION!
– The device must be protected from direct sunlight.