Technical data

TX300 S5 Operating manual 17
Preface Features
ServerView Installation Manager
You can configure the PRIMERGY server quickly and precisely with the
ServerView Installation Manager software provided. User-guided menus are
available for installing the server operating system (for further details see
section "Configuring the server" on page 79).
Service and support
PRIMERGY servers are service-friendly and modular, enabling quick and easy
maintenance.
The handles and locks (touch point) on the various hot pluggable components
are colored green to ensure simple and immediate recognition.
In order to prevent the components from being damaged by incorrect handling
when they are being installed and removed, the areas of all components that
can be touched without damaging them are also marked green.
PRIMERGY diagnostic LEDs fitted on the system board show which component
on the board (memory module, processor, fan) is not functioning properly.
The Flash EPROM program supplied with the Fujitsu Technology Solutions
utilities supports a fast BIOS update.
With the iRMC S2 (integrated Remote Management Controller) on the system
board, the PRIMERGY TX300 S5 server can also be maintained and serviced
remotely. This enables remote diagnosis for system analysis, remote configu-
ration and remote restart should the operating system or hardware fail.