Technical data

106 Operating manual TX300 S5

Non-hot-plug components CSS components

8.2.1 Replacing a memory module

8.2.1.1 Removing and installing a fan bracket

Before replacing the memory modules, you must first remove the fan bracket.

Figure 34: Removing the fan bracket: disconnecting the power cable, loosening the knurled

screws

Ê Disconnect the 10-pole plug of the power cable T26139-Y3952-V401 from

the fan backplane (1).

Ê Release the cable clip and take out the cable (2).

Ê Loosen the two knurled screws of the fan bracket (3).

1 1