Datasheet
Blade Servers Options
Category Description Details
FC-Switch Blade (Director)
FibreCAT SX100 Expansion
FibreCAT SX40
FibreCAT SX60 Expansion
FibreCAT SX80/SX80i Expansion
FibreCAT SX88 Expansion
PRIMERGY BLADE BX620 S6
PRIMERGY BLADE SX650
PRIMERGY BX400 S1
PRIMERGY BX900 S1
PRIMERGY BX920 S2
PRIMERGY BX922 S2
PRIMERGY BX924 S2
PRIMERGY BX960 S1
PRIMERGY Connection Blades
PRIMERGY pBLADE BFi20
PRIMERGY pBLADE BFi40
PRIMERGY SX910 S1
PRIMERGY SX940 S1
PRIMERGY SX960 S1
PRIMERGY SX980 S1
Product Code
EUP (€)
Comments
Options matrix
Connection Blades (Continued)
PY CB FC SW 8G 18/8 26 Enterpr (Brocade)
Fibre Channel Switch 8GB 18/8 (Brocade 5450)
Connection Blade for Fujitsu PRIMERGY BX900
Blade Servers, embedded in the basic unit are:, -
License for 26 Ports with DPOD (Dynamic Ports
on Demand), - Access Gateway, - License for
Full Fabric, - License for Enhanced Group
Management, - License for Fabric Watch, -
License for Advanced Performance Monitor, -
License for ISL Trunking, - License for Extended
Fabric, - License for Adaptive Networking, -
License for Server Application Optimization, - 4 x
Brocade hot-pluggable SFP+ module, 8 GBit/sec
Short-Wavelength Laser (SWL), LC connector
x x S26361-K1305-V126 15.200,00
PY CB IB Switch 40GB 18/18
InfiniBand Connection Blade for Fujitsu
PRIMERGY BX900 blade server., , Double wide,
Single height, , Quad Data Rate (QDR x4), ,
Interfaces:, , intern: 18x (downlinks), , extern: 18x
QSFP connectors (uplink)
x x S26361-K1336-V200 11.800,00
Mezzanine Cards
PY Mezz Card 2x10GB CNA MC-CNA102E
CNA mezzanine module, MC-CNA102E, 2
Channel, 8GB/s, PCIe x8, The mezzanine
module is functional wise compatible with the
Emulex CNA OCe10102., The CNA cards has 2
10GB Ethernet interfaces to the backplane and
support the Data-Center-Bringing (Data Center
Ethernet) protocol. In addintion the Fibre Channel
over Ethernet (FCoE) protcol is fully handled in
hardware on the card.
x x x x S26361-F3592-E502 890,00
PY IB CX2 Mezz Card 40GB 2 Port
InfiniBand Mezzanine Card, 2-channel , 40GB/s,
PCIe x8
x x x S26361-F3992-E2 1.220,00
PY Eth Mezz Card 1GB 4 Port
4 Channel GBE Mezzanine Card, 2 Intel
82575EB LAN Controller
x x x x S26361-F3331-E1 490,00
PY Eth Mezz Card 10GB 2 Port
2 Channel 10GBE Mezzanine Card, Intel
82599EB LAN Controller
x x x x S26361-F3997-E1 560,00
PY FC Mezz Card 8GB 2 Port (MC-FC82E)
Fibre Channel mezzanine module, MC-FC82E, 2
Channel, 8GB/s, PCIe x8, The mezzanine
module is functional wise compatible with the
Emulex HBA LPe12002.
x x x x S26361-F3874-E1 630,00
PY SAS HBA Mezz Card 6GB
SAS/SATA HBA Mezzanine Card based on LSI
Chipset SAS2008, PCIe 2.0 x8, SAS 2.0,
x x x S26361-F4480-E1 195,00Deliverable from: 07/10/2011,Orderable from: 07/10/2011
PY SAS RAID Mezz Card 6GB
SAS/SATA RAID Mezzanine Card based on LSI
MegaRAID SAS2108, PCIe 2.0 x8, SAS 2.0
x x x S26361-F4481-E1 350,00
RAID Mezz iBBU Upgrade
BBU Upgrade for LSI SAS2108
x x x S26361-F4481-E10 180,00
RAID Mezz HDD Connection Kit
SAS HDD backplane for BX920S2 to connect to
SAS RAID mezzanine card. Thereby RAID 0,1
functionality can be realized on BX920S2.
x S26361-F4481-E20 30,00
Communication/Network
Eth Ctrl 2x1GBit PCIe x4 D2735-2 Cu lp
Ethernet Server Adapter Eth Ctrl 2x1GBit PCIe
x4 D2735-2 Cu lp, Based on Intel® LAN
controller chip 82576NS, Usable with original
Intel® driver kit
x S26361-F3610-E202 155,00
FCoE Ctrl 10GB/s 2 channel OCe10102 MMF
2 Channel 10GB/sec FCoE Controller, PCIe 2.0
x 8 Low Profile, SFP+ for opt. module or Twinax
cable
x S26361-F3592-E202 1.180,00
SFP+ Modul Multi Mode Fibre 10GB FCoE
SFP+ module only for use in FCoE Ctrl
OCe10102
x S26361-F3592-E108 400,00
Rack-Infrastructure
Mounting in symmetrical Racks
Rack server mounting in symmetrical racks
without support bracket
x S26361-F4530-E10 5,00
Mounting BX server in asymmetrical racks
Rack server mounting in asymmetrical
PRIMECENTER racks with 10U support bracket
x S26361-F4530-E14 5,00
Rack installation ex works, SX10, 1U Nod
Service for installation of a server or subsystem
ex works., With ordering this service, the
12/24/38U rack will be delivered completely
premounted and tested ex works. In case of the
46U rack, this service has to be ordered to get
the mounting kits and the cables installed.
x S26361-F1647-E302 65,00
Rack installation ex works
Service for installation of a server or subsystem
ex works., With ordering this service, the
12/24/38U rack will be delivered completely
premounted and tested ex works. In case of the
46U rack, this service has to be ordered to get
the mounting kits and the cables installed.
x x SNP:SY-F1647E301-P 130,00
PY SX650 packed and delivered
Storageblade single package/delivery, incl. test
with BX620 S4, Service without integration ex
works
x S26361-F2749-E65 10,00
PRIMERGY Rackinstallation SX/DX ex works
Service for installation of a Raid-Subsystem into
a PRIMERGY Rack ex works., With ordering this
service, the ETERNUS System will be
premounted in a 12/24/38U Rack ex works.
x x x x D:FCSX-INPSR 115,00Phased out
Blade Installation in System Unit
Service for installation of a server blade into the
system unit PRIMERGY BX600 ex works
Augsburg., With ordering this service, the
system unit will be delivered completely
premounted and tested ex works.
x x x x x x x x x x S26361-F2749-E1 10,00
Serverblade single package/delivery
Serverblade single package/delivery, incl. test in
PRIMERGY BX600, Service without integration
ex works
x x x x x x x x x S26361-F2749-E2 45,00
Country kits
region kit APAC/America/EMEA/India
Region-kit APAC/ America/EMEA/ India
x S26361-F1452-E100 10,00
PRIMERGY-Software
BIA-Appliance Modul
HA functionality for Bi-Accelerator., Mandatory for
each extension modul for BIA Entry model
x D:BIA-ADDON 4.000,00Phased out
Fujitsu Technology Solutions Listino Prezzi Ottobre 2011