Datasheet

Rack Servers Options
Category Description Details
PRIMERGY RX100 S7 PRIMERGY RX200 S6 PRIMERGY RX300 S6 PRIMERGY RX600 S6 PRIMERGY RX900 S1 PRIMERGY RX900 S2 Product Code EUP (€) Comments
Options matrix
Communication/Network (Continued)
Eth Ctrl 4x1GBit PCIe x4 D2745 Cu
Ethernet Server Adapter Eth Ctrl 4x1GBit PCIe
x4 D2745 Cu, Based on Intel® LAN controller
chip 82580EB, Usable with original Intel®
driver kit
x x x S26361-F3611-E1 375,00
Eth Ctrl 4x1GBit PCIe x4 D2745 Cu lp
Ethernet Server Adapter Eth Ctrl 4x1GBit PCIe
x4 D2745 Cu lp, Based on Intel® LAN
controller chip 82580EB, Usable with original
Intel® driver kit
x x x S26361-F3611-E201 375,00
Eth Ctrl 2x10GBit PCIe x8 D2755 SFP+ Ethernet Server Adapter Eth Ctrl 2x10GBit
PCIe x8 D2755 SFP+
x x x S26361-F3629-E2 500,00
Eth Ctrl 2x10GBit PCIe x8 D2755 SFP+ lp Ethernet Server Adapter Eth Ctrl 2x10GBit
PCIe x8 D2755 SFP+ lp
x x x S26361-F3629-E202 500,00
IB HCA 40GB 1 port QDR InfiniBand HCA 40GB/s, 1-port, QDR x x x x S26361-F4475-E102 875,00
IB HCA 40GB 2 port QDR InfiniBand HCA 40GB/s, 2-port, QDR x x x x S26361-F4475-E202 1.150,00
FCoE Ctrl 10GB/s 2 channel OCe10102 MMF 2 Channel 10GB/sec FCoE Controller, PCIe
2.0 x 8 Low Profile, SFP+ for opt. module or
Twinax cable
x x S26361-F3592-E202 1.180,00
FCoE Ctrl 10GB/s 2 channel OCe10102 MMF 2 Channel 10GB/sec FCoE Controller , PCIe
2.0 x 8 , SFP+ for opt. module or Twinax cable
x x S26361-F3592-E2 1.180,00
SFP+ Modul Multi Mode Fibre 10GB FCoE SFP+ module only for use in FCoE Ctrl
OCe10102
x x x x x S26361-F3592-E108 400,00
Rack-Infrastructure
RMK-F1_DI_CMA Telescopic drop-in rails, full extraction with
vario-carrier, pre-assembled with centre
screw; with cable management adapter for tool
less mountable cable management arm., Rack
installation depth (19” pillar distance) between
714mm and 785mm
x x S26361-F2735-E140 55,00
RMK-F1_DI_CMA_QRL Telescopic drop-in rails, full extraction with
vario-carrier, pre-assembled with centre
screw;, Rack installation depth (19” pillar
distance) between 714mm and 785mm
x S26361-F2735-E145 95,00
RMK-F2_DI_QRL Telescopic rails full extraction; drop-in mount.;
vario-carrier for tool less mounting with quick
release lever; for rack pillars with square holes
(9.5mm) or round holes (7.1mm); max. load 50
kg;, Rack installation depth (19” pillar distance)
between 714mm and 785mm
x S26361-F2735-E245 115,00
Rack Cable Arm 1U Cable management arm for PRIMERGY
Server with RMK-F1 Drop-in Rails and CMA
adapter, dragged for PRIMECENTER- and
other racks
x x S26361-F2735-E81 20,00
Mounting in symmetrical Racks Rack server mounting in symmetrical racks
without support bracket
x x x S26361-F4530-E10 5,00
Mounting 1U in asymmetrical Racks Rack server mounting in asymmetrical rack
with 1U support bracket
x S26361-F4530-E11 5,00
Mounting 3U in asymmetrical racks Rack server mounting in asymmetrical rack
with 2U support bracket
x x S26361-F4530-E13 5,00
Rack installation ex works, SX10, 1U Nod Service for installation of a server or
subsystem ex works., With ordering this
service, the 12/24/38U rack will be delivered
completely premounted and tested ex works. In
case of the 46U rack, this service has to be
ordered to get the mounting kits and the cables
installed.
x x S26361-F1647-E302 65,00
Rack installation ex works Service for installation of a server or
subsystem ex works., With ordering this
service, the 12/24/38U rack will be delivered
completely premounted and tested ex works. In
case of the 46U rack, this service has to be
ordered to get the mounting kits and the cables
installed.
x x x x SNP:SY-F1647E301-P 130,00
Cable magmt. for 19" PC- Rack Cablemanagement for adding a server or
storage subsystem into the PRIMECENTER
rack
x x S26361-F2735-E7 30,00
1 U cable arm, dragged
Cable arm for PRIMERGY Server, dragged for
PRIMECENTER- and 3rd-party racks
x S26361-F2735-E8 30,00Phased out
Fujitsu Technology Solutions Listino Prezzi Ottobre 2011