Datasheet

System configurator and order-information guide
H
FSC PRIMECENTER Rack Status 2007-09-26
Within the basic units of PRIMECENTER racks, are no power outlets integrated.
It is possible to order such power outlets as follows (1- or 3- phase power outlet), or the connections to the
mains can be done via an UPS. The maximum current load for each phase may not exceed 32amp (IEC309, CEE plugs).
For each Euro socket connector IEC320 C14 may 10A and for IEC320 C20 may 16A not be exceeded.
3-phase power socket outlet 3~240 volt / 32 A
S26361-F2262-E332
3-phase permanent connection
with 3x3 (9) IEC320 C19 sockets
plus 3x2 (6) IEC320 C13 sockets
different colours per phase
secured by either 16A or 10A circuit breakers
+ 4m cable with 32A CEE (IEC 309) red plug
S26361-F2262-E301
mounting kit for horizontal mounting in a Rack
can carry up to 2 PDU`s E332 or as max.
as a max. configuration 4x PDU's E132
As a mixed configuration the customer
is able to configure 2x E132 and 1x E332
incl. 2x1U cover, support bracket, occupies 2U
1-phase power socket outlet 1~240 volt / 32A
S26361-F2262-E132
1-phase connection
with 3 IEC320 C19 sockets and 16A circuit breaker
plus 2 IEC320 C13 sockets and 10A circuit breaker
+ 4m cable with 32A CEE (IEC 309) blue plug
incl. support brackets for 19" vertical mounting
horizontal mounting ocupies 2U(S26361-F2262-E301)
For this the RMK must be ordered
for rear mountig, a support bracket is needed as well
S26361-F2262-E45 Order numbers for
1-phase connection with 8 bulk delivery
Euro socket connectors, 4m S26361-F2262-L332
cable connected with 32A S26361-F2262-L132
CEE 1-phase (big) plug blue colour S26361-F2262-L45
Note: recommended for server > 1200 W S26361-F2262-L301
Extension of the 1/3 phase connection possibilities
SNP:SY-F1903E1-P SNP:SY-F1903E2-P
Expansion 3 safety sockets (D) Multiple socket outlet 4x peripherals +
as extension, with 10A Euro socket 1 x safety plug as extension, with
connector at the connection cable safety plug at the connection
(1,5m in length) cable (3m in length)
1x per phase of the socket strip I + II 1x per phase of the socket strip I
Max. number of socket strips for
vertical
mounting:
S26361-F2262-E132 S26361-F2262-E332
max. per rack max. per rack
5x 46 U rack 2x 46 U rack
4x 38 U rack 2x 38 U rack
2x 24 U rack 1x 24 U rack
1x 12 U rack 0x 12 U rack
horizontal mounting only via horizontal mounting only via
new designed Rackmount kit new designed Rackmount kit
S26361-F2262-E301 Socket S26361-F2262-E301 Socket
strip RMK 2U horizontal strip RMK 2U horizontal
I
KS
SS
Fujitsu Siemens Computers Enterprise Products - PRIMERGY Server 13 von 26