Datasheet

System configurator and order-information guide
B
PRIMERGY TX120 S3 Status 2012-06-29
Section
III
Memory
There are 2 memory banks with 2 DIMM slots each.
Single channel memory configuration allow maximum flexibility:
Additional memory can be configured as single memory modules.
Dual channel memory configurations for maximum performance:
For optimum performance memory has to be configured in pairs of memory modules with identical size.
Note**: Memory is not included in the base unit and has to be configured separately, min 1x.
** see note above
Unbuffered (ub) UDIMMs
- One DDR3- ub ECC memory module, 1.5V
Memory 2GB 1333 SR S26361-F3335-E524
4x
Memory 4GB 1333 DR S26361-F3335-E525
Memory 8GB 1333 DR S26361-F3335-E526
Choose up to 4 order codes above.
Section
IV
Graphics
Graphics Controller integrated in iRMC with 32 MB attached Memory with following resolution:
- 16 bit color with maximum resolution of 1600 x 1200
- 24 bit color with maximum resolution of 1280 x 1024
- 32 bit color with maximum resolution of 1152 x 864
This resolution is also available via iRMC advance video redirection.
NOTE: Only VESA-compliant graphics modes are supported
S26361-F2748-E637
PY VGA LP card 512MB PCI-e x1
NVIDIA NVS300 The hight end optional NVIDIA NVS300 graphic card offers dual head operation
512 MB PCIe-x1
and fully 3D video support.
2x DVI or 2x VGA or The cables for either two times DVI or VGA connections are part of the delivery.
1x DVI plus 1x VGA Remote Video direction via iRMC must be disabled.
cables adapters included
This PCIe-x1 card can also be installed in any PCIe-x4, x8 or x16 slot.
Dual head + fully 3-D
Only one card per server is allowed.
supported for Windows OS
only native driver support for Linux OS
PY VGA card must be installed in slot 2
low profile bracket
max. 1x per system S26361-F2748-L637
PY VGA LP card 512MB PCI-e x1
for loose delivery
C
Fujitsu Technology Solutions x86 PRIMERGY Server 7 of 14