PRIMERGY TX120 S3 System configurator and order-information guide July 2012 Contents Instructions Configuration diagram Configurator Software Configurator EM64T I Basic unit II Processor III Memory IV Graphics V Accessible drives VI Hard disk drives VII SAS-Controller VIII Disk array IX Communication/Network X Energy Star restrictions XI System management options XII Miscellaneous XIII Country specific power cords Change report PRIMERGY Server Fujitsu Technology Solutions x86 PRIMERGY Server 1 of 14
System configurator and order-information guide PRIMERGY TX120 S3 Status 2012-06-29 Instructions This document contains basic product and configuration information that will enable you to configure your system via PC-/ System-Architect. Only these tools will ensure a fast and proper configuration of your PRIMERGY server or your complete PRIMERGY Rack system. You can configure your individual PRIMERGY server in order to adjust your specific requirements.
System configurator and order-information guide PRIMERGY TX120 S3 Status 2012-06-29 Configuration diagram PRIMERGY TX120 S3 System unit ( I ) SIDE VIEW FRONT VIEW PS (I) Processor ( II ) System Fan Intel CPU (Dual-or Quad Core) I/A II / A I/B II / B Operating Panel 5.25" x0.5" Empty / ODD 3.5" HH Backup Standard Power Supply Access.
System configurator and order-information guide PRIMERGY TX120 S3 Status 2012-06-29 Start PRIMERGY TX120 S3 SW Configurator EM64T with OEM-Software without OEM-Software for PRIMERGY Server for PRIMERGY Server OEM-SW is bound to HW and is not allowed to be ordered separately. For all SW products please refer to the corresponding software configurator accessible via the Extranet under Configuration & Tools, -All configurations, -Software, URL see below.
System configurator and order-information guide PRIMERGY TX120 S3 Status 2012-06-29 Start PRIMERGY TX120 S3 I Section Basic unit System unit Floorstand including: * Two lockable front covers Door #1 for accessible drive bays Door #2 for hot plug HDD bays (Type 1 base unit only) Both doors may be locked or door #1 may be left open while door #2 is still locked * HD type depending on base unit: Type 1: 4x hot plug SFF (2.5") SAS or SATA HDD (SFF base units only) Type 2: 2x non hot plug LFF (3.
System configurator and order-information guide PRIMERGY TX120 S3 Status 2012-06-29 A Floorstand-version Basic unit without CPU and Memory - One CPU has to be configured additionally for a base configuration - One memory kit has to be configured for a base configuration SFF (2.5") Base Unit (Type 1) S26361-K1380-V101 LFF (3.5") Base Unit (Type 2) S26361-K1380-V201 S26361-F3552-E1 Be aware of import restrictions! S26361-F3552-L1 TPM Module Only 1 TPM per system.
System configurator and order-information guide PRIMERGY TX120 S3 Status 2012-06-29 B III Section Memory There are 2 memory banks with 2 DIMM slots each. Single channel memory configuration allow maximum flexibility: Additional memory can be configured as single memory modules. Dual channel memory configurations for maximum performance: For optimum performance memory has to be configured in pairs of memory modules with identical size.
System configurator and order-information guide PRIMERGY TX120 S3 Status 2012-06-29 C V Section Accessible drives There are 2 bays for accessible drives: - 1x 5.25" bay is occupied by a 0.5" DVD respectively a DVD-RW drive - 1 x 3.5" bay remaining, can be occupied by 1x 1.
System configurator and order-information guide PRIMERGY TX120 S3 Status 2012-06-29 D VI a) Section Hard Disk Drives for Type 1 (SFF/2.5") Base Units Using Type 1 Base Unit up to 4 SATA or SAS SFF (2.5") hard disks can be configured. ECO SATA 3Gb/s HD 2.5" with hot plug/hot replace tray 160GB 5.400rpm,<10,5ms, 8MB Cache 320GB 5.400rpm,<10,5ms, 8MB Cache 500GB 5.400rpm,<10,5ms, 8MB Cache Choose up to 4 order codes above.
System configurator and order-information guide PRIMERGY TX120 S3 Status 2012-06-29 E Section 8 VII SAS-Controller Low Profile SAS RAID Controller for external backup drives for JBOD S26361-F3628-E201 SAS Controller 6Gb/s 8 port LSI SAS9200-8e lp SAS 6Gb/sec ext: 8 port PCIe 2.0 x4, low profile bracket max.
System configurator and order-information guide PRIMERGY TX120 S3 Status 2012-06-29 F IX Section Communication / Network 2x Gigabit Ethernet Contr. on-board Intel Hartwell and Lewisville ext: 2x RJ 45-connector SW: AFT, VLAN, Fast Channel Teaming: Failover, Load Balancing The Intel LAN Controllers 1000TX and 1000SX can be used with the on-board controller in Teaming Mode.
System configurator and order-information guide PRIMERGY TX120 S3 Status 2012-06-29 H XI Section System management options S26361-F1790-E242 iRMC3 advanced pack integrated remote management controller activation key for graphical console redirection and remote media redirection max. 1x per system S26361-F2571-E27 Service LAN Front management LAN Port Ideal in combination with iRMC adv. pack For local maintenance / console redirection, Integrated in front (operating panel) max.
System configurator and order-information guide PRIMERGY TX120 S3 Status 2012-06-29 I Section XIII Country specific power cords / Kits S26361-F3301-E120 CCC Certification for China Since the beginning of this year the specifications for the approval and production monitoring for China (CCC) have become stricter.
System configurator and order-information guide PRIMERGY TX120 S3 Status 2012-06-29 Change Report Date Order number Changes 2012-01-30 2011-12-21 2011-10-01 2011-08-09 2011-07-11 2011-06-01 S26361-F3641-E2 S26361-F4482-E114 S26361-F3601-E250 new Blue-ray Triple Writer added SAS HD 6G 144GB - no longer available new BC SATA HD - now available Celeron CPUs with FCS in September 2011 added Region kit integrated First Release S26361-F1452-E100 Fujitsu Technology Solutions x86 PRIMERGY Server 14 of 14
