Datasheet
System configurator and order-information guide
B
PRIMERGY RX100 S7 Status 2011-11-30
Section 2
II
Processor
Note**: The CPU is not included in the base unit and has to be configured separately.
One of following CPU´s has to be selected
for an orderable basic unit
Dual-Core CPU`s
- 1x 64-bit Intel
Celeron (2MB SLC), Pentium (3MB SLC) or
Core-i3 (3MB TLC)
occupies socket for one CPU
Celeron
Celeron G530 2.40GHz 2MB 2C/2T 1066MHz (65W) S26361-F3579-E253 on special release
Celeron G530T 2.00GHz 2MB 2C/2T 1066MHz (35W)
S26361-F3579-E252
Pentium
Pentium G620 2.60GHz 3MB 2C/2T 1066MHz (65W) S26361-F3579-E262
Core i3
Core i3-2100 3.10GHz 3MB 2C/4T 1333MHz (65W) S26361-F3579-E210
Core i3-2120 3.30GHz 3MB 2C/4T 1333MHz (65W) S26361-F3579-E212 on special release
Xeon E3-12xx
- 1x 64-bit Intel Xeon UP (8MB shared TLC = Third Level Cache)
Hyper-Threading (HT not with X3430); 1333 MHz DDR3 Bus and heat pipe
occupies socket for one CPU
Xeon E3-1220 3.10GHz 8MB 4C/4T 1333MHz Turbo (80W) S26361-F3579-E322
Xeon E3-1230 3.20GHz 8MB 4C/8T 1333MHz Turbo (80W) S26361-F3579-E323 on special release
1x Xeon E3-1240 3.30GHz 8MB 4C/8T 1333MHz Turbo (80W) S26361-F3579-E324
Xeon E3-1270 3.40GHz 8MB 4C/8T 1333MHz Turbo (80W) S26361-F3579-E327
Xeon E3-1280 3.50GHz 8MB 4C/8T 1333MHz Turbo (95W) S26361-F3579-E328 on special release
Xeon E3-12xxL Power Optimized
- 1x 64-bit Intel Xeon LV UP (4/8MB shared TLC = Third Level Cache)
Hyper-Threading (HT); 1066 or 1333 MHz DDR3 Bus and heat pipe
occupies socket for one CPU
Xeon E3-1220L 2.20GHz 3MB 2C/4T 1333MHz Turbo (20W) S26361-F3579-E312
Xeon E3-1260L 2.40GHz 8MB 4C/8T 1333MHz Turbo (45W) S26361-F3579-E316
Section
3
III
Memory
There are 2 memory banks with 2 DIMM slots each.
Single channel memory configuration allow maximum flexibility:
Additional memory can be configured as single memory modules.
Dual channel memory configurations for maximum performance:
For optimum performance memory has to be configured in pairs of memory modules with identical size.
max. 32GB unbuffered DDR3 RAM for UDIMMs with 8GB moduels
Note**: Memory is not included in the base unit and has to be configured separately, min 1x.
Unbuffered (ub) DIMMs
- One DDR3- ub ECC memory module, 1.5V
Memory 2GB 1333 SR S26361-F3335-E524
4x Memory 4GB 1333 DR S26361-F3335-E525
Memory 8GB 1333 DR S26361-F3335-E526
Choose up to 4 order codes above.
Section
4
IV
Riser Card
Two riser cards are
Included in basic unit
Section
5
V
Graphics
Graphics Controller integrated in iRMC S3 (integrated Remote Management Controller):
1600x1200x16bpp 60Hz, 1280x1024x16bpp 60Hz, 1024x768x32bpp 75Hz, 800x600x32bpp 85Hz, 640x480x32bpp 85Hz
(1280x1024x24bpp 60Hz only possible if local monitor or remote video redirection is off)
Opt. Front VGA + Service LAN
S26361-F2748-E637
S26361-F2748-L637
Please refer to Sys.Manag. XII
PY VGA LP card 512MB PCI-e x1 PY VGA LP card 512MB PCI-e x1
NVIDIA NVS300
for loose delivery
512 MB PCIe-x1
Connectors: 1x LFH 59
1x
cable kit for 2x DVI or 2x VGA
Optional Front VGA
cable kits included
only possible for Dual head + professional 2-D + 3-D
onboard graphics
supported for Windows OS
native driver support for Linux OS
low profile bracket
max. 1x per system
C
Fujitsu Technology Solutions x86 PRIMERGY Server 9 of 17