Datasheet
System configurator and order-information guide
S
PRIMERGY BX400 System Unit Status: 2013-03-28
5
Section
V
a
Connection Blades Ethernet 10Gb
S26361-K1304-V200
S26361-K1304-V303 *) *) for separate delivery, without blade chassis
PY CB Eth Switch/IBP 10Gb 18/8
EHM, L2+ Switch or IBP released with below BX900 LAN solutions:
18x downlink / 8x uplink 10GbE - 1Gb and 10Gb LoM of all server blades
6x
EHM (End-Host-Mode) is default - Mezz Card 4 x 1Gb
S26361-F3331-E1
external: - Mezz Card 2 x 10Gb
S26361-F3997-E1
8x SFP+ / SFP
- Mezz Card MC-CNA102E
S26361-F3592-E502
Port LEDs: link, activity
- Mezz Card MC-CNA112E
S26361-F3592-E532
Switch LEDs: power, status
max. 6x per System Unit
The 10Gb Connection Blade is released for:
fabric 1 - 3 (CB 1 - 6) of the System Unit.
S26361-F2749-E1
Service for Blade installation
in the System Unit.
Hereby the BX900 S2 will
be delivered completely
configured and tested
with the Blade integrated.
1x per Switch Blade
S26361-F3986-E1 S26361-F3986-E2
SFP Module 1000Base-T SFP Module 1000Base-SX
SFP module for 1 Gbit SFP module for 1 Gbit
separate orderable 1Gb Ethernet modules
max. 100m
max. 550m with OM3 fiber
S26361-F3986-E1 SFP Module 1000Base-T
850 nm laser S26361-F3986-E2 SFP Module 1000Base-SX
Ethernet CU cabling (RJ45) Ethernet FO cabling
max. 8x per switch max. 8x per switch
S26361-F3986-E3 S26361-F3986-E4
SFP+ Module MMF 10GbE LC SFP+ Module SMF 10GbE LC
SR SFP+ module for 10 Gbit LR SFP+ module for 10 Gbit
separate orderable 10Gb Ethernet modules
8x max. 300m with OM3 fiber max. 10km with 9µm fiber S26361-F3986-L3
SFP+ Module MMF 10GbE LC
850 nm laser 1310 nm laser S26361-F3986-L4 SFP+ Module SMF 10GbE LC
Ethernet FO cabling Ethernet FO cabling
max. 8x per switch max. 8x per switch
V:TWX CONNECTOR-SP
for FTS and BR Twinax only
S26361-F3989-E600 *) S26361-F3873-E500 *) *) in SA only shown in cabling view
SFP+ active twinax cable SFP+ active twinax cable
customized twinax cable for customized twinax cable for separate orderable 10Gb Ethernet cables
full rack setup ex factory
full rack setup ex factory S26361-F3989-L102 SFP+ active twinax cable 2m
cable length is selected by
cable length is selected by S26361-F3989-L105 SFP+ active twinax cable 5m
requirement in the factory requirement in the factory S26361-F3989-L110 SFP+ active twinax cable 10m
Fujitsu branded cable Brocade branded cable S26361-F3873-L501 SFP+ active twinax cable 1m
max. 8x per switch max. 8x per switch S26361-F3873-L503 SFP+ active twinax cable 3m
S26361-F3873-L505 SFP+ active twinax cable 5m
S26361-F4571-L101
SFP+ passive twinax cable 1m
S26361-F4571-L107 SFP+ active twinax cable 7m
S26361-F4571-L110 SFP+ active twinax cable 10m
S26361-F3873-L5xx are Brocade branded cables
S26361-F4571-L1xx are Cisco branded cables
S1
Fujitsu Technology Solutions x86 PRIMERGY Server 11 of 19