Datasheet

System configurator and order-information guide
B
PRIMERGY RX100 S7p Status 2012-04-30
Section 2
II
Processor
Note**: The CPU is not included in the base unit and has to be configured separately.
One of following CPU´s has to be selected
for an orderable basic unit
Dual-Core CPU`s
- 1x 64-bit Intel
Celeron (2MB SLC), Pentium (3MB SLC) or Core-i3 (3MB TLC)
occupies socket for one CPU
Celeron
Celeron G530 2.40GHz 2MB 2C/2T 1066MHz (65W) S26361-F3579-E253 on special release
Pentium
tbd as soon as available
Core i3
Core i3-3220 3.30GHz 3MB 2C/4T 1333MHz (65W) as soon as available
Xeon E3-12xxv2
- 1x 64-bit Intel Xeon UP (8MB shared TLC = Third Level Cache)
Hyper-Threading (HT not with X3430); 1333 MHz DDR3 Bus and heat pipe
1x
occupies socket for one CPU
Xeon E3-1220v2 3.10GHz 8MB 4C/4T 1600MHz Turbo (69W) S26361-F3580-E322
Xeon E3-1230v2 3.30GHz 8MB 4C/8T 1600MHz Turbo (69W) S26361-F3580-E323
Xeon E3-1240v2 3.40GHz 8MB 4C/8T 1600MHz Turbo (69W) S26361-F3580-E324 on special release
Xeon E3-1270v2 3.50GHz 8MB 4C/8T 1600MHz Turbo (69W) S26361-F3580-E327
Xeon E3-1280v2 3.60GHz 8MB 4C/8T 1600MHz Turbo (69W) S26361-F3580-E328 on special release
Xeon Power Optimized
- 1x 64-bit Intel Xeon LV UP (3/8MB shared TLC = Third Level Cache)
Hyper-Threading (HT); 1600 MHz DDR3 Bus and heat pipe
occupies socket for one CPU
Xeon E3-1220Lv2 2.30GHz 3MB 2C/4T 1600MHz Turbo (17W) S26361-F3580-E312
Xeon E3-1265Lv2 2.50GHz 8MB 4C/8T 1600MHz Turbo (45W) S26361-F3580-E316
Section
3
III
Memory
There are 2 memory banks with 2 DIMM slots each.
Single channel memory configuration allow maximum flexibility:
Additional memory can be configured as single memory modules.
Dual channel memory configurations for maximum performance:
For optimum performance memory has to be configured in pairs of memory modules with identical size.
max. 32GB unbuffered DDR3 RAM for UDIMMs with 8GB moduels
Note**: Memory is not included in the base unit and has to be configured separately, min 1x.
- One DDR3- unbuffered ECC memory module, 1.5V
2GB (1x2GB) 1Rx8 DDR3-1600 U ECC S26361-F3719-E513
4x 4GB (1x4GB) 2Rx8 DDR3-1600 U ECC S26361-F3719-E514 The delivered memory module can be LV, but will be operated at 1.5V
8GB (1x8GB) 2Rx8 DDR3-1600 U ECC S26361-F3719-E515
Choose up to 4 order codes above.
Section
4
IV
Riser Card
Two riser cards are
Included in basic unit
Section
5
V
Graphics
Graphics Controller integrated in iRMC S3 (integrated Remote Management Controller):
1600x1200x16bpp 60Hz, 1280x1024x16bpp 60Hz, 1024x768x32bpp 75Hz, 800x600x32bpp 85Hz, 640x480x32bpp 85Hz
(1280x1024x24bpp 60Hz only possible if local monitor or remote video redirection is off)
as soon as available
Opt. Front VGA + Service LAN
S26361-F2748-E637
S26361-F2748-L637
Please refer to Sys.Manag. XII
PY VGA LP card 512MB PCI-e x1 PY VGA LP card 512MB PCI-e x1
NVIDIA NVS300
for loose delivery
512 MB PCIe-x1
Connectors: 1x LFH 59
1x
cable kit for 2x DVI or 2x VGA
Optional Front VGA
cable kits included
only possible for Dual head + professional 2-D + 3-D
onboard graphics
supported for Windows OS
native driver support for Linux OS
low profile bracket
max. 1x per system
C
Fujitsu Technology Solutions x86 PRIMERGY Server 9 of 18