Datasheet

www.myelux.com eLux
®
NG
Build # 27 87
(3) IEEE 802.1x/ Leap Configuration:
Figure 58 Setup > Hardware > Wireless LAN > IEEE802.1x
1. Select IEEE 802.1X (LEAP) from the WPA mode list.
2. Enter the SSID information you got from your network administrator.
• Service Set Identifier (SSID) defines the network name of a wireless network based on the
IEEE 802.11b standard.
3. Configure the channel where the Access Point provides its service or set Auto for this para-
meter, in order to make the client scan for the used channel and automatically configure it.
4. Depending on your authentication server enter user name and password as set on your
authentication server.
5. The Lightweight Extensible Authentication Protocol (LEAP) is a proprietary method which
enables to integrate the authentication of wireless clients into a Radius server.
6. Click Apply and then Yes in the eLux NG Starter dialog box.
Display of the Signalstärke in the taskbar:
When configuring Wireless LAN for the network type, the signal strength of your WLAN
connection is displayed by an icon on the taskbar..
Signal strength: none
Signal strength: low
Signal strength: medium
Signal strength: high
Signal strength: very high