Datasheet

www.myelux.com eLux
®
NG
Build # 27 86
1. Select WEP from the WPA mode list.
2. Enter the WEP key you received from your network administrator.
3. Enter the SSID information you got from your network administrator.
• Service Set Identifier (SSID) defines the network name of a wireless network based on
the IEEE 802.11b standard.
4. Configure the channel where the Access Point provides its service or set Auto for this
parameter, in order to make the client scan for the used channel and automatically
configure it.
5. Click Apply and then Yes in the eLux NG Starter dialog box.
When the device restarts, it will attempt to contact the access point using wireless LAN.
(2) WPA Configuration:
Figure 57 Setup > Hardware > Wireless LAN > WPA
1. Select WPA (PSK) from the WPA mode list.
2. Enter the SSID information you got from your network administrator.
• Service Set Identifier (SSID) defines the network name of a wireless network based on the
IEEE 802.11b standard.
3. Configure the channel where the Access Point provides its service or set Auto for this para-
meter, in order to make the client scan for the used channel and automatically configure it.
4. Enter the Preshared Key you received from your network administrator.
5. Click Apply and then Yes in the eLux NG Starter dialog box.