Datasheet

www.myelux.com eLux
®
NG
Build # 27 73
3.13.2 ISDN **
You have two possibilities to connect to ISDN: PCI interface card or USB modem.
3.13.2.1 ISDN Card
In this variant, the Thin Client has an ISDN card installed and is connected to an ISDN cable.
See “
Appendix 6: Supported Hardware” for a list of supported hardware.
3.13.2.2 USB Network Adapter
In this variant, the Thin Client is connected to an ISDN cable over a USB network adapter.
Verify that a LAN cable (for example, Ethernet) is not connected to the device.
Warning Do not use USB ISDN with a Thin Client that already contains an ISDN card.
See “
Appendix 6: Supported Hardware” for a list of supported hardware.
3.13.2.3 Configuring Network Hardware Settings for ISDN
Figure 45: Setup > Hardware > ISDN
1. From the Setup tab, click the Hardware subtab.
2. Click ISDN from the Network type list.
A series of fields appears.
3. Select a profile from the Profile list. Otherwise click Edit to create or edit one. This opens
the Network profiles dialog box.
4. In the Network profiles dialog box click New to create a new profile or Edit to modify an
existing one.
The Profile dialog box is displayed.