Datasheet

www.myelux.com eLux
®
NG
Build # 27 72
3.13 Network Hardware
Software Requirements
ISDN, ADSL, modem: “ISDN Modem ADSL support” (file name: “isdn”) FPM in base OS EPM.
Required software for wireless LAN is discussed in the wireless LAN chapter.
For a description of EPMs and FPMs, see the ELIAS NG Administrator’s Guide.
 To modify network hardware settings
1. From the Setup tab, click the Hardware subtab.
2. Click your network type from the Network type drop-down list: Ethernet, ISDN, ADSL,
Modem, Token ring. Fill in the related fields.
3. Click Apply.
A detailed description of each network setting follows. For a list of supported cards, see “Appendix 6:
Supported Hardware.”
3.13.1 Ethernet
Depending on your hardware platform you can connect to a local-area network using the onboard
Ethernet card, a network interface card, or an adapter card for fiber optic.
 To set network hardware settings for Ethernet
1. From the Setup tab, click the Hardware subtab.
2. Click Ethernet from the Network type list.
3. Select the Ethernet speed from the Speed list. If Auto does not work, see your
network administrator for the correct speed.
• 1 Gbit Only available for the gigabit Ethernet network card Broadcom Tigon 3
(BCM570x). Other card parameters will be automatically configured.
• AUI, BNC: Only available for the 3Com® EtherLink® 10 PCI Combo Network
Interface Card.
4. Click Apply.