Datasheet

www.myelux.com eLux
®
NG
Build # 27 32
3.3 Desktop
Desktop settings can be individually tailored to your country’s language and time zone.
Figure 20: Setup > Desktop
 To modify the desktop settings
From the Setup tab, click the Desktop subtab.
1. Select your desktop language from the Language list.
• The default language of eLux NG screen elements (tabs, lists, etc.) is English.
• The eLux NG screen elements themselves can only be displayed in English or German.
However, your country’s language must be set for local applications to work correctly.
2. Click Background color to set the eLux NG desktop background color.
3. Although eLux NG is mouse-based, several keyboard commands are important. The Task
hotkey drop-down list allows you to choose the key combination to switch between current
open sessions, or “tasks.” You can use this not only to switch between applications, such as
between an XTerm and an ICA application, but also between eLux NG screens, such as the
main eLux NG screen and a dialog box. Default is CTRL + ALT + <cursor>.
CTRL + ALT + : Left selection in the Applications bar
CTRL + ALT + : Right selection in the Applications bar
4. Click Apply and then Yes in the eLux NG Starter dialog box.
 To set the date and time
From the Setup tab, click the Desktop subtab.
1. Select your time zone from the Time zone list.
• eLux NG adjusts for daylight savings time automatically.
2. There are two ways to set the time:
• Manually: Enter the date and time and click Adjust to update the settings.
• Automatically: (recommended) Enter a time server. Settings are retrieved when the Thin
Client boots. For technical requirements, see the section “
3.3.1 Time Server” below.
3. Click Apply and then Yes in the eLux NG Starter dialog box.