Datasheet

www.myelux.com eLux
®
NG
Build # 27 18
2.2.2.3 Step 3: Summary
Finally, you are given a summary of
the entered information.
When you click Next, the
configuration is updated and the
desktop may be restarted.
Figure 8: First contact: Summary
The Wizard assists you in setting minimum user settings. User settings are described in detail
in chapter “
3 Setup.”
2.3 Troubleshooting
Problem: An error message appears at boot saying the network interface “etho0” has been
disconnected.
Solution: There is no LAN connection. Check for loose cable connections. Check that the cable is
patched and the port is active.
Problem: An error message appears at boot saying the DHCP client does not have IP address
information.
Solution: When a DHCP time-out occurs the first time the Thin Client boots, eLux NG network
settings are set to “manual” and you are prompted to enter network settings by hand. A
Wizard appears to guide you through the process.
Please be aware that the next time the Thin Client boots, it will not automatically search
for a DHCP server. To set network settings to DHCP, in the eLux NG starter go to Setup
> Network.