Datasheet

www.myelux.com eLux
®
NG
Build # 27 14
First Boot Procedure:
This is the boot procedure for a Thin Client with default settings (upon delivery, after a factory reset, or
after a Recovery Installation):
1. Scan BIOS
2. Check if a LAN (Ethernet) connection is available
• If none is found, an error message is displayed, eLux NG is booted, and the First
Configuration Wizard appears, allowing the user to set initial user settings. Go to step 6.
3. Make a DHCP server request
• If a DHCP server is not found, an error message is displayed, eLux NG is booted, and the
user is asked to enter the network information manually. Go to step 6.
4. Boot eLux NG
5. The device is automatically entered in Scout Enterprise and configured. Requirement: The
hostname “ScoutSrv” has been set to the Scout Enterprise Server IP address on the DNS
server.
• If the hostname “ScoutSrv” cannot be resolved, this step is skipped.
6. First Contact: A Wizard appears, helping the user through the initial configuration.
This procedure does not apply to subsequent boots.