Datasheet

www.myelux.com eLux
®
NG
Build # 27 188
6 Recovery Installation
During an eLux NG Recovery Installation, the Thin Client boots from a server over the network, loads
network information from a so-called boot server”, loads a boot file from a TFTP server, and overwrites
the entire flash image with a default image retrieved from the recovery server. The software is
overwritten with the recovery software and settings are returned to factory-delivered default settings.
A recovery can be used to solve the following problems:
• eLux NG cannot be booted anymore.
• The flash memory of the Thin Client does not yet contain a basic image.
• The password for LocalLogin has been changed from factory settings and is no longer known.
• You want to replace the current software on the flash memory with eLux NG.
• You want to make a factory reset.
• To update from eLux 1.x to eLux NG.
• When during update a message box appears saying a recovery is necessary.
Note: The Recovery procedures, which install the eLux NG Software to the flash of the Thin Client or
make a factory reset of the Thin Client, are described in detail in our papers Recovery Installation
and Migration and Servertransfer. These guides are provided on f
www.myelux.com in the area
Manuals / Documentation.
/