Datasheet

www.myelux.com eLux
®
NG
Build # 27 186
Error 403: Forbidden
Error 404: File or directory not found
Error 406: Client browser does not accept the MIME type of the
requested page (client problem)
Error 407: Initial proxy authentication required by the Web server
Solution: If an update is interrupted, click the Details button to display a detailed error message.
Depending on the HTTP error that is displayed, take the appropriate actions. If you have
checked that settings are correct, you can do the following:
1. Verify that the IDF is in the appropriate HTTP server directory.
2. Enter the MIME types. If you are using IIS version 6.0 or higher, you must enter the
MIME types explicitly. If you are using a previous version IIS or a different HTTP server,
see if defining the MIME types solves the problem. For more information, see "
3.6.4
Microsoft Internet Information Server.“
Ch.
3.7, “Security”
Problem: You no longer have the password for the terminal (=LocalLogin).
Solution: The Thin Client’s password is at the same time the password for LocalLogin. Factory
default is “elux”. If you change and then forget LocalLogin’s password, only a Recovery
Installation can reset the password. All settings are reset to factory default.
Ch.
3.11, “Printer”
Problem: After you connect a locally attached printer and load the printer drivers to the Citrix
MetaFrame ICA server, you log on to the terminal server computer. The printer is
supposed to be autocreated and available to you in the Printers folder of your Terminal
Server session. The printer does not appear in the Printers folder.
Solution: If the printer driver name on the thin client does not match the printer driver name on the
terminal server computer exactly, the printer will not autocreate. On the thin client, correct
spelling, capitalization and spacing.
In addition, on the Citrix MetaFrame ICA server verify the following:
1. In Citrix Connection Configuration double click the ICA listener port. Select the Client
Settings button, ensure "Connect client printers at logon" is checked.
2. Ensure that the following boxes are not checked under the Client Settings Area:
Disable Windows Client Printer Mapping
Disable Client LPT Mapping
Both of these settings prevent client printers from being autocreated on the system, and
prohibit the client printer from being manually added during the session.
For further MetaFrame configuration, see the Citrix documentation.
Ch. 3.13, “ISDN“
Problem: ISDN does not connect (not the first time you try to connect).
Solution: Check the ISDN error codes.
 Procedure for troubleshooting ISDN connections
1. Open a local shell (XTerm)
2. On prompt type: dmesg | xmessage – file -