Datasheet

www.myelux.com eLux
®
NG
Build # 27 180
• By default, the virtual keyboard program uses the keyboard language setting from the
eLux NG starter (see “
3.5 Mouse / Keyboard”), assuming the language is supported,
otherwise English will be used. To manually set the language for this session or to view a
list of available languages, click Main menu > Change Keyboard Layout.
Tip
• To set the size and/or position, enter the following command in the Parameter field:
xvkbd.sh –geometry <width>x<height>+<x position>+<y position>
Examples:
xvkbd.sh –geometry 600x200 Set keyboard size to 600x200 pixel
xvkbd.sh –geometry 600x200+200+0 Set keyboard size to 600x200 pixel and
position it above center
xvkbd.sh –geometry 600x200+0-40 Set keyboard size to 600x200 pixel and
position it lower left
For further information, see the documentation available at
http://homepage3.nifty.com/tsato/xvkbd/.