Datasheet

www.myelux.com eLux
®
NG
Build # 27 163
4.7.6 VNC
To use this software, you must have the “VNC client” (vnc) package installed.
A VNC (Virtual Network Computing) viewer allows you to connect to a VNC server or to mirror
a Thin Client.
Figure 102: VNC viewer
 To configure a VNC session
From the Configuration tab, click New.
1. The Application Definition dialog box appears. Click the Emulation tab.
2. Click VNC in the Emulation type list. A series of fields appears.
• Name: Enter an appropriate name for this application, such as “VNC.”
• Server address: Use the following format (see below):
<IP address or name of the VNC server>:<display number>
• Password: Enter the password of the VNC server. If you are connecting to a Thin
Client, enter the mirroring password saved to the Thin Client, if it exists.
• Application Restart: Click to select to immediately reconnect after the user logs
off. When this feature is selected, the application automatically starts when the
Thin Client starts or restarts.
• Start automatically: Click this check box to open the session when the terminal
start.
• Desktop icon Creates a desktop shortcut for this application on the eLux NG
desktop.
3. Click Finish.