Datasheet

www.myelux.com eLux
®
NG
Build # 27 155
• Tarantella: for a Tarantella server
• PowerTerm: for IBM Mainframe, IBM AS/400,Unix, VAX/Alpha OpenVMS,
Tandem (NSK), HP-3000 and Data General (to be licensed)
A series of fields appears. Fill in the requested information (see sections
4.7.1 to 4.7.7).
• Application Restart: Immediately reconnects after the user logs off. When this feature is
selected, the application automatically starts when the Thin Client starts or restarts.
• Start automatically: Click this check box to open the session when the terminal starts.
• Desktop icon Creates a desktop shortcut for this application on the eLux NG desktop.
2. Click Finish.
4.7.1 Tarantella
To use this software, you must have the “Tarantella Native Client” (tarantella) package
installed.
Tarantella uses a bitmap protocol to connect from a Tarantella client to a Tarantella server,
which can then connect to another machine. It can be used as an alternative to Citrix for small
installations.
You can enter the server name (or IP address) and the username directly in the application
definition.
The native Tarantella client has no further parameters. The configuration of the client is done
within the application. For further information consult the Web site
www.tarantella.com.
4.7.2 Terminal Emulation for Motif
To use this software, you must have the “Terminal emulation for Motif” (xemu) package
installed.
“Terminal emulation for Motif” is a terminal emulation suite for IBM and BS2000 systems that
includes the following emulations:
• 3270 for IBM mainframes with TN3270E protocol
• 5250 for IBM AS400 systems with TN5250E protocol
• 9750 for BS2000/OSD systems with TCP/IP
This is a licensed product. The software includes a 15-minute trial period To purchase a
license, please contact
[e-mail]. You can purchase either a license that is
distributed using the Scout Enterprise management tool or a license that is entered directly on
the terminal (start the program > Add-Ons menu > Licensing).
The configuration is saved in a file with the extension "cfg". Select the configuration file from
the drop-down list. Initially only the default configuration file (X32: 3270.cfg, X52: 5250.cfg,
X97: default.cfg) is available.
 To define a new configuration file
1. Start the emulation.
2. Set the settings you want.
3. The menu command File > CONFIGURATION > Save as allows you to save the
settings to a new configuration file. Enter the name of the configuration file in the Save
Configuration dialog box. You must enter the extension “.cfg”!
Note The path must be the default /setup/xemu!
4. Close the emulation and return to the eLux NG Configuration tab.