Datasheet

www.myelux.com eLux
®
NG
Build # 27 136
4.4 RDP
This connection corresponds to the ICA functionality using Microsoft Remote Desktop Protocol (RDP).
It is used to connect to a Microsoft Terminal Server. The application type is a native RDP client with
the free software "rdesktop." For further information see
www.rdesktop.org.
Previous releases of eLux offered a Java-based RDP solution from Hob called “JWT” that was
licensed. This application has since been incorporated into the J-Term emulation (also from HOB).
Please consult HOB (
www.hob.de) for further information.
You have two configuration possibilities: Windows desktop or individual application.
4.4.1 Remote Desktop
A remote desktop session allows you access to the desktop of a terminal server. You can run
any applications available on the desktop, in any order.
Figure 80: RDP client configured for a remote desktop
 To configure a remote desktop session via RDP
From the Configuration tab, click New.
1. The Application Definition dialog box appears. Click the RDP tab.
• Name: Enter an appropriate name for this application, such as “RDP Desktop.”
• Server: Enter the IP address or name of the terminal server.
• Application: Leave blank.
• Working dir: Leave blank.
• User, Password, Domain: Enter to automatically log on to the terminal server.
• Roaming: Click this check box to enable smart card User Roaming. A smart card and
PIN are required when the terminal starts. If the PIN is correct, the terminal server