Datasheet

System configurator and order-information guide
Start PRIMERGY TX300 S5
PRIMERGY TX300 S5 Status 2009-09-29
Section
I
SAS - Basic units
SAS - System unit, Rack and Floorstand including:
* By a key lockable front slider in floorstand version
* Basic units with:
A.) - 1x 800W Hot-Plug Power Supply (no redundancy) + 3x 120mm Standard Fans (no redundancy)
B.) - 2x 800W Hot-plug and redundant Power Supplies + 3x hot-plug and redundant Double Fans
- 9 memory DIMMs per CPU ( max 72GB ) => Total 18 DIMMs ( max 144GB ) for two CPU`s
- SAS backplane with 6 x 1" bays for 3.5" hot plug SAS or SATA HD`s
* 3 drive bays 5,25" for accessible drives free available.
* Integrated ServerView Diagnostics Technology ( Diagnosis LED`s ) for indication of internal
failed components
Options:
* 2nd hot plug power supply module 800W (PSU) for redundancy in Basic Unit A.)
* 12x 2.5" HD backplane conversion kit
* - Optional modular RAID 0/1 controllers with IME (Integrated Mirroring Enhanced) support
based on LSI 1064 or LSI 1068 chipset or as alternative
- optional modular RAID 5 controller based on LSI 1078 chipset
* One 0,5" bay can be configured with an optional LC- display for LocalView in a drawer or
with an optional CSS ( Customer Self Service ) modul for indication of a failed component via LED`s
Simultaneously components are marked which can be replaced by the customer.
This LEDs can be dispalyed during service even without mains connection.
Systemboard D2619 with:
* Up to two Xeon Dual Core, Quad-Core or Turbo Quad Core CPU`s ( Nehalem-EP, LGA 1366 socket )
with serial QPI links ( Quick Path Interconnect ) and three memory channels per CPU
First CPU has to be selected for an orderable basic unit,
* Chipset Intel® 5520P (codenamed Tylersburg-EP or 36D)
* 7 PCI slots: - 2x PCIe-2 x8 (wired x8, notched, possible to plug x16 card)
- 5x PCIe-2 x8 (wired x4)
From 4 PCIe-slots each two wired x4 slots can be combined to one wired x8 slot
One PCIe-2-slot is populated with one of two possible modular Raid-controllers.
* 18 memory slots for max. 144GB RAM DDR3 available
- Memory is divided into 9 DIMMs per CPU ( 3 channels with 3 slots per channel )
- Max. three 8GB modules or two 8GB / 16GB quad rank modules are possible per channel
First Memory ( one module ) has to be selected for an orderable basic unit per CPU
- Memory upgrade is possible module wise
- Memory mirrroring is supported with 2 identical modules in channel A+B CPU 1 or D+E CPU 2
- Hot Spare Memory is supported with 3 identical modules in channel A+B+C CPU 1 or D+E+F CPU 2
- SDDC (Chipkill) is supported for memory modules,
* Dual Port 10/100/1000 x4 PCI Express* Gigabit Ethernet Intel LAN controller Zoar on-board
* iRMC S2 (integrated Remote Management Controller) on-board server management controller with
dedicated 10/100 Service LAN-port and integrated graphics controller.
The Service LAN-port can be switched alternatively on standard Gbit LAN port 1
* Graphics Controller integrated in iRMC S2 (integrated Remote Management Controller):
1600x1200x16bpp 60Hz, 1280x1024x16bpp 60Hz, 1024x768x32bpp 75Hz, 800x600x32bpp 85Hz,
640x480x32bpp 85Hz
(1280x1024x24bpp 60Hz only possible if local monitor or remote video redirection is off)
A
Fujitsu Technology Solutions x86 PRIMERGY Server 7 of 30