Datasheet

System configurator and order-information guide
PRIMERGY TX300 S5 Status 2009-09-29
Mounting kits for PRIMERGY TX300 S5
- 1 pair of telescopic rails full extraction
- 1 Vario carrier DC-PC-3rd party Rack
allows toolless adjustable in depth and easy mounting
- 1 bracket PRIMECENTER and DataCentre-Racks
Mounting kit for mounting of servers in FSC 19" PRIMECENTER- racks
and all server racks conforming to EIA standard EIA-310-D for 19" racks.
Therefore the mounting kit is variable in depth from 704-790mm
C
S26361-F2735-E103 S26361-F2735-E111 S26361-F2735-L103
RMK_F2 TX300-S4
No Rackmount-Kit option
RMK_F2 TX300-S4
telescopic rail, full extraction,
Only for loose deliveries for loose delivery
1-hand-mounting
No mounting in Racks possible
consisting of
max. 1x per system
- 1 pair of telescopic rails
with easy-mounting-clips
- 1 bracket DC-PC-3rd-Rack
D
1x per system
S26361-F2735-E7 S26361-F2201-E20
Cable management PC-Rack Cable arm 3rd P-Rack
In case nor cable arm is ordered, S26361-F2735-L7
- for FSC Primecenter / - for 3rd party
Server must be prevent of beeing
Cable management PC-Rack
Datacenter Racks
1x per system
pulled out. for loose delivery
- not for 3rd party
1x per system
for 3rd party rack cable routing
please order
S26361-F2201-L20
Cable arm 3rd party racks
PRIMERGY PRIMECENTER-rack for loose delivery
SNP:SY-F1647E301-P
Installation ex works for one
server or subsystem.
Hereby the rack will be delivered
completely pre-mounted and
all wired connections are tested. PRIMERGY 42/23U rack
With racks 12U, 24U, 38U:
Systems and components
will be delivered installed in the rack "Rack-mounting ex factory"
With racks 46U: This service is to be ordered once
Systems and components per installable server/storage
will be delivered separately subsystem, in order to get the
To be ordered only together with server/storage subsystem
a PRIMERGY PRIMECENTER rack mounted into the PRIMERGY racks.
e.g.: In case of the 46 U PRIMERGY Rack,
S26361-K826-V10x this service has to be ordered,
refer configurator PC-Rack to get the mounting kits and the
max. 1x per System cables installed.
For later conversion the following kits are available: FSC PC-/DC-/3rd party- Rack
1.) Conversion kit 3 Floor -> Rack S26361-F1729-L240
Conversion PRIMERGY TX300 S5 base unit floorstand into
base unit rack including 2 power cords with inlet connector
for non-heating apparatus. Only conversion, no mounting kit. plus
Mounting kit has to be ordered seperatly
2.) Mounting Kit FSC PC-/DC-/3rd party- Rack S26361-F2735-L103
incl. DC- PC- bracket, no cable managment RMK_F1 TX300-S4
This kit will fit in server racks and
conforming to EIA standards EIA-310-D for 19" racks.
3.) cable management or cable arm
to be ordered additionally either one to be ordered
FSC PC-/DC- Rack cable management or S26361-F2735-L7 or
D 3rd party- Rack cable arm S26361-F2201-L20
PRIMERGY TX300 S5 Rack
Fujitsu Technology Solutions x86 PRIMERGY Server 10 of 30