System information

180 Upgrade and Maintenance Manual RX2520 M1
Expansion cards and backup units
9.5.2.6 Installing the air duct with an FBU
Figure 87: Connecting the FBU to the controller
Ê Insert the air duct.
Ê Connect the FBU cable to the RAID controller.
Ê Route the cable in such a way that the cable is not pinched under the air
duct.
9.5.2.7 Concluding steps
Ê "Reassembling" on page 57
Ê "Connecting the server to the power source" on page 62
Ê "Switching on the server" on page 64
Ê If applicable, "Updating RAID controller firmware" on page 77.
Ê "Enabling SVOM boot watchdog functionality" on page 82