Operation Manual
Table Of Contents
- Contents
- 1 Preface
- 2 Installation steps, overview
- 3 Important information
- 4 Hardware installation
- 5 Starting up and operation
- 5.1 Access to the drives (floorstand model)
- 5.2 Control elements and indicators
- 5.3 Switching the server on and off
- 5.4 Configuring the server
- 5.4.1 Configuring the onboard SATA controller
- 5.4.2 Configuring the SAS/SATA RAID controller
- 5.4.3 Configuring the server and installing the operating system with the ServerView Installation Manager
- 5.4.4 Configuring the server and installing the operating system without the ServerView Installation Manager
- 5.5 Cleaning the server
- 6 Property and data protection
- 7 Troubleshooting and tips
- 7.1 Power-on indicator remains unlit
- 7.2 Server switches itself off
- 7.3 Screen remains blank
- 7.4 Flickering stripes on monitor screen
- 7.5 No screen display or display drifts
- 7.6 No mouse pointer displayed on screen
- 7.7 Incorrect date and time
- 7.8 Drives reported as “dead” when starting system
- 7.9 Added drive reported as defective
- 7.10 Error message on screen
- 7.11 Expansion cards or onboard devices not recognized
- 7.12 Temperature warning
- 7.13 No effect of keyboard or mouse
- 7.14 Optical drive cannot read data
- 8 CSS components
- 8.1 Hot-plug components
- 8.2 Non-hot-plug components
- 9 Appendix: server specification
- Index
TX150 S7 Operating Manual 119
Inde
x
K
key lock 63
L
labels 40
laser information 33
light emitting diode (LED) 33
lithium battery 31
Low Voltage Directive 23, 35
M
MAC address 63
main memory 107
mains voltage, connecting server 56
meaning of the symbols 22
MegaRAID 17, 75
memory module
inserting 108
removing 107
monitor
display drifts 83
no display 83
mouse, no mouse pointer on
screen 83
N
NMI button 62, 63
noise level 24
notational conventions 22
O
On/Off button 62, 63
onboard SATA controller 16, 74
configuring 77
operation 59
optical drive
open/close button 62
overload 20
P
packaging 39, 42
PCI SAS controller, configuring 77
PDA 18, 20
power on indicator 64
power supply unit 56
cable clamp 57
indicators 70
redundant 56
power supply, redundant 56
power-on indicator 62
does not light 81
PRIMECENTER Rack
requirements 45
PRIMECENTER rack
installing server
48
PRIMERGY Diagnostic
LED 21
product name 42, 63
property protection 79
R
rack
requirements 45
RAID controller is not configured for
this drive 84
RAID level 18
recycling devices 40
regulations and standards 23
Remote Storage 19
requirements
3rd party rack 46
DataCenter rack 45
PRIMECENTER Rack 45
reset button 62, 63
return of devices 40
routing
cables 51
S
safety instructions 27
safety standards 23
SAS IME controller 17
SAS MegaRAID controller 17
SAS/SATA RAID controller 17
configuring 75
saving energy 39
screen
error message 85