Operation Manual
Table Of Contents
- Contents
- 1 Preface
- 2 Installation steps, overview
- 3 Important information
- 4 Hardware installation
- 5 Starting up and operation
- 5.1 Access to the drives (floorstand model)
- 5.2 Control elements and indicators
- 5.3 Switching the server on and off
- 5.4 Configuring the server
- 5.4.1 Configuring the onboard SATA controller
- 5.4.2 Configuring the SAS/SATA RAID controller
- 5.4.3 Configuring the server and installing the operating system with the ServerView Installation Manager
- 5.4.4 Configuring the server and installing the operating system without the ServerView Installation Manager
- 5.5 Cleaning the server
- 6 Property and data protection
- 7 Troubleshooting and tips
- 7.1 Power-on indicator remains unlit
- 7.2 Server switches itself off
- 7.3 Screen remains blank
- 7.4 Flickering stripes on monitor screen
- 7.5 No screen display or display drifts
- 7.6 No mouse pointer displayed on screen
- 7.7 Incorrect date and time
- 7.8 Drives reported as “dead” when starting system
- 7.9 Added drive reported as defective
- 7.10 Error message on screen
- 7.11 Expansion cards or onboard devices not recognized
- 7.12 Temperature warning
- 7.13 No effect of keyboard or mouse
- 7.14 Optical drive cannot read data
- 8 CSS components
- 8.1 Hot-plug components
- 8.2 Non-hot-plug components
- 9 Appendix: server specification
- Index
116 Operating Manual TX150 S7
Appendix: server specification
Dimensions (Base unit specific)
Environmental
Electrical values
Floor-stand (W x D x H) 205 x
584 x 444 mm
Rack (W x D x H) 482 x 635 x 220 mm
Mounting Depth Rack 617 mm
Noise emission Measured according to ISO 7779 and declared
according to ISO9296
Sound pressure
(LpAm)
25 dB(A) (idle) / 34 dB(A) (operating)
Sound power (LWAd;
1B = 10dB)
4.3 B (idle) / 5.2 B (operating)
Operating ambient
temperature
10 - 35°C
Operating relative
humidity
10 - 85 % (non condensing)
Power supply
configuration
Base unit specific:1x standard power supply or
1x hot-plug power supply or 2x hot plug power
supply for redundancy
Max. output of standard
power supply
350 W
Max. output of hot-plug
power supply
450 W
Rated voltage range 100 - 240 V
Rated frequency range 50 - 60 Hz
Rated current max. 6.0 A – 3.0 A (100 V / 240 V)