Operation Manual
Table Of Contents
- Contents
- 1 Preface
- 2 Installation steps, overview
- 3 Important information
- 4 Hardware installation
- 5 Starting up and operation
- 5.1 Access to the drives (floorstand model)
- 5.2 Control elements and indicators
- 5.3 Switching the server on and off
- 5.4 Configuring the server
- 5.4.1 Configuring the onboard SATA controller
- 5.4.2 Configuring the SAS/SATA RAID controller
- 5.4.3 Configuring the server and installing the operating system with the ServerView Installation Manager
- 5.4.4 Configuring the server and installing the operating system without the ServerView Installation Manager
- 5.5 Cleaning the server
- 6 Property and data protection
- 7 Troubleshooting and tips
- 7.1 Power-on indicator remains unlit
- 7.2 Server switches itself off
- 7.3 Screen remains blank
- 7.4 Flickering stripes on monitor screen
- 7.5 No screen display or display drifts
- 7.6 No mouse pointer displayed on screen
- 7.7 Incorrect date and time
- 7.8 Drives reported as “dead” when starting system
- 7.9 Added drive reported as defective
- 7.10 Error message on screen
- 7.11 Expansion cards or onboard devices not recognized
- 7.12 Temperature warning
- 7.13 No effect of keyboard or mouse
- 7.14 Optical drive cannot read data
- 8 CSS components
- 8.1 Hot-plug components
- 8.2 Non-hot-plug components
- 9 Appendix: server specification
- Index
TX150 S7 Operating Manual 111
CSS components Non-hot-plug components
8.2.5 Closing the server
V CAUTION!
● Before removing or attaching covers, turn off the server, all peripheral
devices,and any other connected devices. Also unplug all power
cables from the outlet. Failure todo so can cause electric shock.
● Before attaching the cover, make sure no unnecessary parts or tools
are left inside the server.
● Before turning on the server, make sure the top cover is closed.
V CAUTION (for rack model)!
Be careful not to pinch fingers or clothes when sliding out the server or
pushing it back. Failure to do so may cause injury.
Figure 33: Closing the server (example: floorstand model)
Ê Pull the locking lever as far as it will go and insert the side cover.
0
/