PRIMERGY TX100 S1 System configurator and order-information guide July 2010 Contents Instructions Configuration diagram Configurator 0 System software I Basic unit II Processor III Memory IV Graphics V Accessible drives VI RAID Controller VII Hard disk drives VIII Communikation/Network IX Miscellaneous X Country specific power cords Change report PRIMERGY Server
System configurator and order-information guide PRIMERGY TX100 S1 Status 2010-06-30 Instructions This document contains basic product and configuration information that will enable you to configure your system via PC-/ System-Architect. Only these tools will ensure a fast and proper configuration of your PRIMERGY server or your complete PRIMERGY Rack system. You can configure your individual PRIMERGY server in order to adjust your specific requirements.
System configurator and order-information guide PRIMERGY TX100 S1 Status 2010-06-30 Configuration diagram PRIMERGY TX100 S1 FRONT VIEW SIDE VIEW System unit ( I ) Channel B Standard Power supply DIMM 2 - B DIMM 1 - B XEON 5.25" x 1.6" CD / DVD drive Channel A Core2Duo DIMM 2 - A or Pentium DIMM 1 - A 5.25"x1.6" Memory ( III ) Processor ( II ) Accessible drives (V) PCIe x4 (wired x1), notched possible to plug x16 cards SATA - 3.5"x1" PCIe x8 lp option available SATA - 3.
System configurator and order-information guide PRIMERGY TX100 S1 Status 2010-06-30 Start PRIMERGY TX100 S1 Software Configurator 32 bit with OEM-Software without OEM-Software for PRIMERGY Server for PRIMERGY Server OEM-SW is bound to HW and is not allowed to be ordered separately.
System configurator and order-information guide PRIMERGY TX100 S1 Status 2010-06-30 Start PRIMERGY TX100 S1 Software Configurator 64 bit with OEM-Software without OEM-Software for PRIMERGY Server for PRIMERGY Server OEM-SW is bound to HW and is not allowed to be ordered separately.
System configurator and order-information guide PRIMERGY TX100 S1 Status 2010-06-30 Start PRIMERGY TX100 S1 I Section Basic unit System unit consisting of: * Housing including standard power supply (no redundancy) * Imprint of MAC Adress on system label and delivery note as standard Systemboard with: * 4 PCI expansion slots: 1x PCIe x4 (wired x1), notched (posible to plug x16 cards) 1x PCIe x8; fits for lp and fh formfactor cards 1x PCIe x8 (wired x4) 1x long 32Bit / 33MHz (3.
System configurator and order-information guide PRIMERGY TX100 S1 Status 2010-06-30 A S26361-K1326-V101 SATA basic unit Floorstand S26361-K1326-V121 SATA basic unit Floorstand without CPU and Memory - Minimum one CPU / Memory module has to be selected via CPU / Memory order codes for up to 2 LFF (3.5") HDD (2 HDD cables included) without CPU and Memory - Minimum one CPU / Memory module has to be selected via CPU / Memory order codes for up to 4 LFF (3.
System configurator and order-information guide PRIMERGY TX100 S1 Status 2010-06-30 B II Section Processor One of following CPU´s has to be selected for an orderable basic unit Dual-Core CPU`s - 1x 64-bit Intel Core2 Duo Exx00 (2/3MB SLC) or Xeon UP (4/6MB SLC) and with heat 1066pipe or 1333MHz Frontside Bus occupies socket for one CPU Pentium DC E5200 2.50GHz 2MB 800MHz FSB (65W) S26361-F3582-E520 Pentium DC E5400 2.70GHz 2MB 800MHz FSB (65W) S26361-F3582-E540 Pentium DC E6300 2.
System configurator and order-information guide PRIMERGY TX100 S1 Status 2010-06-30 C V Section Accessible drives There are 2 drive bays (2x 5,25") for accessible drives. While stock lasts a FDD may be used in Projects only. Following USB Components are available 1) USB DVD+-RW: Super Multi DVD slim drive 2) FDD USB (external): external USB FDD 3) USB Keyboard: KBPC PX D, professional keyboard 4) USB Mouse: Optical Wheel Mouse Tilt USB/PS2 5) USB Memorybird: SATA incl. description (Ger/US) 1.6 x 5.
System configurator and order-information guide PRIMERGY TX100 S1 Status 2010-06-30 D Section VI RAID-Controller Section VII Hard disk drives There is a 6 port SATA controller in the Base Unit. Up to 4 SATA LFF (3.5") hard disks can be configured. S26361-F3219-E160 HD 160GB 7.2krpm 3.5" 7200rpm,<9.0 ms, 8MB Cache SATA 3Gb/s non hot plug max. 4x per system S26361-F3334-E250 HD 250GB 7.2krpm 3.5" 7200rpm,<9.0 ms, 8MB Cache BC-SATA 3Gb/s non hot plug max.
System configurator and order-information guide PRIMERGY TX100 S1 Status 2010-06-30 E VIII Section Communication / Network S26361-F3241-E1 (Glyndon) Gigabit Ethernet Contr. 1000TX Eth Ctrl 1x1Gbit PCIe Pro/1000PT Cu Intel PRO/1000 PT Server Adaptor PCIe x1 ext: for RJ45-connector, Cat 5 max. 2x per system S26361-F3228-E1 (Redwater) Gigabit Ethernet Controller Dual 1000TX Eth Ctrl 2x1Gbit PCIe PRO/1000PT Cu Intel Pro/1000PT dual port Server Adapter PCIe x4 ext: for RJ45-plug, Cat 5 max.
System configurator and order-information guide PRIMERGY TX100 S1 Status 2010-06-30 F Section IX Miscellaneous S26361-F2742-E30 Paralell Interface option occupies one card slot max. 1x per system S26361-F2542-E323 Key lock in side door option black max.
System configurator and order-information guide PRIMERGY TX100 S1 Status 2010-06-30 Change Report Date Order number Changes 2009-08-17 2009-08-17 2009-06-30 S26361-F2542-E323 New Order Codes for CPUs E5200 and E7400 Key Lock Option changed to BLACK => new Order Code First Release Fujitsu Technology Solutions x86 PRIMERGY Server 13 of 13
