PRIMERGY RX100 S5 System configurator and order-information guide May 2010 Contents Instructions Configuration diagram Configurator 0 System software I Basic unit II Processor III Memory IV Riser Card V Graphics VI Accessible drives VII Hard disk drives VIII SCSI controller IX Disk array X Communication/Network XI System Management Products (RemoteView) XII Miscellaneous XIII Country specific power cord Change report PRIMERGY Server
System configurator and order-information guide PRIMERGY RX100 S5 Status 2010-04-30 Instructions This document contains basic product and configuration information that will enable you to configure your system via PC-/System-Architect Only these tools will ensure a fast and proper configuration of your PRIMERGY server or your complete PRIMERGY Rack system. You can configure your individual PRIMERGY server in order to adjust your specific requirements.
System configurator and order-information guide PRIMERGY RX100 S5 Status 2010-04-30 Configuration diagram PRIMERGY RX100 S5 System unit ( I ) Standard Bank 1 Modul 1 Xeon 3xxx / Celeron Pentium Dual Core Core 2 Duo Modul 3 Power supply Bay for 3,5"x 0,5" CSS 5.25"x0.5" Empty / ODD Bank 2 Modul 2 Accessible drives ( VI ) Modul 4 Processor ( II ) Hard disk drives ( VII ) Memory ( III ) 1 PCIe-Bus 3.
PRIMERGY-Software Configurators and Release Lists PRIMERGY RX100 S5 Status 2010-04-30 Start PRIMERGY RX100 S5 SW - Configurator 32 bit with OEM-Software without OEM-Software for PRIMERGY Server for PRIMERGY Server OEM-SW is bound to HW and is not allowed to be ordered separately.
PRIMERGY-Software Configurators and Release Lists PRIMERGY RX100 S5 Status 2010-04-30 Start PRIMERGY RX100 S5 SW - Configurator EM64T with OEM-Software without OEM-Software for PRIMERGY Server for PRIMERGY Server For all SW products please refer to the corresponding software configurator accessible via the Extranet under "Configuration & Tools, -All configurations, -Software, URL see below.
System configurator and order-information guide PRIMERGY RX100 S5 Status 2010-04-30 Start PRIMERGY RX100 S5 Section 1 I Basic unit System unit consisting of: * 1U Housing including standard power supply -Standard Power Supply Unit * Fans - Fans for Power Supply and Chassis * Drives / Bays - 2 bays 3.5" for "easy change" HDDs (hotplug upgrade option available) or - 1 bay 0.5" height for optional SATA ODD - 1 bay 0,5" height for optional CSS-modul ( Customer Self Service ) Options: * 2x 3.
System configurator and order-information guide PRIMERGY RX100 S5 Status 2010-04-30 A Base Unit (for 19'' racks) with SATA RAID controller Base Unit (for 19'' racks) with SAS RAID controller - S26361-K1160-V101 - S26361-K1160-V201 S26361-F3436-E4 no TPM Disable function for Trusted Platform Use according to import restrictions max.
System configurator and order-information guide PRIMERGY RX100 S5 Status 2010-04-30 B Section 2 II Processor Note**: The CPU is not included in the base unit and has to be configured separately . One of following CPU´s has to be selected for an orderable basic unit Dual-Core CPU`s - 1x 64-bit Intel Pentium Dual Core E5xxx & E6xxx (2MB SLC) or Core2 Duo E7x00 (3MB SLC) or Xeon E31xx (6MB SLC) and with heat 1066pipe or 1333MHz Frontside Bus occupies socket for one CPU Pentium DC E5200 (2.
System configurator and order-information guide PRIMERGY RX100 S5 Status 2010-04-30 C Section 6 VI Accessible drives Setup PRIMERGY RX100 S5 by ServerStart is supported with following configurations: no DVD, no CD: remote installation only ( PXE service & DHCP server required) built in DVD or USB DVD: UNC Network share reachable or USB Floppy or MemoryBird connected If installation is done locally, make sure you have internal or external FDD available for driver installation.
System configurator and order-information guide PRIMERGY RX100 S5 Status 2010-04-30 D Section 7 VII Hard disk drives base unit with SATA RAID controller base unit with SAS RAID controller Every SATA base unit is prepared for easy change SATA standard hard disks. An option for hot plug hard disks is possible to order. D1 S26361-F3461-E160 HD 160GB 7.2krpm 3.5" 7200rpm,<9.0 ms, 8MB Cache SATA 3Gb/s non hot plug S26361-F3272-E250 HD 250GB 7.2krpm 3.5" 7200rpm,<9.
System configurator and order-information guide PRIMERGY RX100 S5 Status 2010-04-30 D1 base unit with SAS RAID controller Harddisk Bay hot plug 2x 3.5" Always included in SAS Base Unit S26361-F3861-E160 HD 160GB 7.2krpm 3.5" 7200rpm,<9.0 ms, 8MB Cache SATA 3Gb/s hot plug/hot replace tray S26361-F3265-E250 HD 250GB 7.2krpm 3.5" 7200rpm,<9.0 ms, 8MB Cache SATA 3Gb/s hot plug/hot replace tray S26361-F3265-E500 HD 500GB 7.2krpm 3.5" 7200rpm,<9.0 ms, 8MB Cache SATA 3Gb/s hot plug/hot replace tray max.
System configurator and order-information guide PRIMERGY RX100 S5 Status 2010-04-30 F Section 8 VIII SCSI/SAS-Controller SCSI/SAS-Controller Low Profile Slot suitable for Standard/Low Profile PCIe only 1x per System 2 slots PCIe x8 ( wired x8 ) available SCSI-controller for external drives and peripheral devices Only released for FibreCAT TXF All controllers for the connection of external storage systems are delivered without cables.
System configurator and order-information guide PRIMERGY RX100 S5 Status 2010-04-30 G Sections 9 IX Disk Array base unit with SATA RAID controller base unit with SAS RAID controller On board Hot Plug / Easy Change The system is equipped with a 4-ch SAS on-board controller and embedded "IME". SATA RAID Controller IME (Integrated Mirroring Enhanced) offers the RAID levels 0, 1, 1E without any additional costs.
System configurator and order-information guide PRIMERGY RX100 S5 Status 2010-04-30 H Section # X Communication / Network Dual Gigabit Ethernet Contr. Teaming: Failover, Load Balancing onboard The Intel LAN Controllers 1000GT, 1000MF, 1000PT, 1000PF Broadcom BDC5715C can be used with the on-board controller in Teaming Mode ext: 2x RJ 45 connector 2 slots PCIe x8 ( wired x8 ) available C) PCI-Express Adapter 1000TX/SX S26361-F3241-E201 (Glyndon ) Gigabit Ethernet Contr.
System configurator and order-information guide PRIMERGY RX100 S5 Status 2010-04-30 I Section # XI System Management Products (RemoteView) S26361-F1790-E241 iRMC S2 advanced pack integrated remote management iRMC S2 (integrated Remote Management Controller) onboard server management controller with dedicated 10/100 Service LAN-port and integrated graphics controller.
System configurator and order-information guide PRIMERGY RX100 S5 Status 2010-04-30 Change Report Date Order number Changes 2009-09-30 2009-07-31 2009-07-31 2009-03-31 2009-01-27 2008-12-17 2008-12-05 2008-11-25 2008-11-25 2008-09-30 2008-09-30 2008-09-30 2008-09-30 2008-09-30 2008-09-01 2008-09-01 2008-09-01 2008-07-14 2008-07-08 2008-06-05 2008-04-17 2008-04-30 2008-03-17 2008-03-17 2008-02-27 2008-01-01 S26361-F3870-E516 S26361-F3476-E760 S26361-F3476-E630 S26361-F3268-E1 S26361-F3476-E110 S26361-F1
