User Manual
Table Of Contents
- Title
- Contents
- May I introduce myself?
- Information before you start
- Software overview
- Operating pocket LOOX 610
- Overview of operating elements and connections
- Initial start-up
- Switching Pocket PC off and on
- Using standard operating elements
- Adjusting display lighting
- Making sound recordings
- Using the cradle
- Synchronising data with ActiveSync
- Backing up data with FSC Backup
- Panning instead of scrolling with FSC Panning
- Inserting and removing expansion cards
- Pocket LOOX 610 in mobile use
- FSC SpeedMenu - Operating pocket LOOX 610 quickly with one hand
- Configuring Pocket LOOX 610
- Connecting and networking Pocket LOOX 610 with other devices
- Accessories and additional components
- Troubleshooting and tips
- Installing new software
- Date or time of the Pocket PC is incorrect
- The display of the Pocket PC remains dark
- The information on the display of the Pocket PC is difficult to read
- The Pocket PC switches off
- The Pocket PC does not start after switch on
- The Pocket PC stops working
- The battery discharges too quickly
- The Suspend button does not respond properly
- No sound or minimal volume
- Contact with hotline/help desk
- Technical data
- Index
A26391-K139-Z120-1-7619 61
Troubleshooting and tips
If a fault occurs in your Pocket PC, try to eliminate it with the measures described in this chapter. If
you fail to correct the problem, proceed as follows:
Ê Make a note of the steps and the circumstances that led to the fault. Also make a note of any
error messages displayed.
Ê Switch the Pocket PC off.
Ê Contact your sales outlet or our hotline/help desk.
Installing new software
You will find information on installing supplementary programs in the ActiveSync help file that you
can call up after installing ActiveSync on your PC/notebook.
When installing programmes or drivers, important files may be overwritten and modified. To be able
to access the original files in case of problems following installation, you should make a backup
copy prior to installation (see the chapters "Synchronising data with ActiveSync“ and "Backing up
data with FSC Backup“).
Date or time of the Pocket PC is incorrect
Ê Touch Start.
Ê Select the Settings entry in the menu.
Ê Select the System tab.
Ê Touch the Clock symbol.
Ê Depending on your preference, you can change the time by moving the click hands or by
entering the desired time.
Ê Touch OK (navigation bar) to confirm your setting.
The display of the Pocket PC remains dark
Display lighting is switched off
Ê Press the Suspend button longer than 1 second.
The information on the display of the Pocket PC is difficult to
read
Reflection
Ê Turn the Pocket PC until you can see the information in the display again.