User Manual
Table Of Contents
- Title
- Contents
- May I introduce myself?
- Information before you start
- Software overview
- Operating pocket LOOX 610
- Overview of operating elements and connections
- Initial start-up
- Switching Pocket PC off and on
- Using standard operating elements
- Adjusting display lighting
- Making sound recordings
- Using the cradle
- Synchronising data with ActiveSync
- Backing up data with FSC Backup
- Panning instead of scrolling with FSC Panning
- Inserting and removing expansion cards
- Pocket LOOX 610 in mobile use
- FSC SpeedMenu - Operating pocket LOOX 610 quickly with one hand
- Configuring Pocket LOOX 610
- Connecting and networking Pocket LOOX 610 with other devices
- Accessories and additional components
- Troubleshooting and tips
- Installing new software
- Date or time of the Pocket PC is incorrect
- The display of the Pocket PC remains dark
- The information on the display of the Pocket PC is difficult to read
- The Pocket PC switches off
- The Pocket PC does not start after switch on
- The Pocket PC stops working
- The battery discharges too quickly
- The Suspend button does not respond properly
- No sound or minimal volume
- Contact with hotline/help desk
- Technical data
- Index
Connecting and networking Pocket LOOX 610 with other devices
56 A26391-K139-Z120-1-7619
Wireless data transfer with infrared interface
The infrared interface (IrDA) on the left side of your Pocket PC provides you with wireless serial data
transfer of up to 4 Mbits/s. In general, Fast Infrared is the interface of choice for the fastest possible
data transfer rate of 4 Mbits/s. However, should you notice difficulties when exchanging data with
slower devices, please switch to the Slow Infrared setting (115 kbits).
For data transfer, you must align the infrared interface of your Pocket PC with that of the partner
device (e.g. PC). The devices must not be more than one metre apart. The infrared interface of one
device must be in the range of influence (horizontally approx. 30 ° and vertically approx. 15 °) of the
infrared interface of the other device.
Run the program Infrared Receive under Programs on your Pocket PC. The Pocket PC immediately
begins to search for the partner device (infrared transmitter) and informs you on any infrared
interface found.
If the infrared partner device has not been found, point the device in another direction and then run
the program Infrared Receive again.
Wireless communication with BLUETOOTH (optional)
With your Pocket PC with an integrated BLUETOOTH™ module you can communicate wirelessly
with other BLUETOOTH devices, e.g. with another Pocket PC, a notebook or a mobile phone.
Your Pocket PC with integrated BLUETOOTH is a Power Class 2 device, i.e. it has a maximum
range of 10 meters. The range of the communication paths is shortened depending on the user
environment (e.g. walls or furniture), building structure and output power class of the partner.
BLUETOOTH supports many functions (Services), e.g. accessing the Internet and transmitting or
receiving data or e-mails.
In the following sections, you will find out how to put BLUETOOTH into operation.
The help file for the software on your Pocket LOOX 610 explains how you operate the software
concerned.