User Manual
Table Of Contents
- Title
- Contents
- May I introduce myself?
- Information before you start
- Software overview
- Operating pocket LOOX 610
- Overview of operating elements and connections
- Initial start-up
- Switching Pocket PC off and on
- Using standard operating elements
- Adjusting display lighting
- Making sound recordings
- Using the cradle
- Synchronising data with ActiveSync
- Backing up data with FSC Backup
- Panning instead of scrolling with FSC Panning
- Inserting and removing expansion cards
- Pocket LOOX 610 in mobile use
- FSC SpeedMenu - Operating pocket LOOX 610 quickly with one hand
- Configuring Pocket LOOX 610
- Connecting and networking Pocket LOOX 610 with other devices
- Accessories and additional components
- Troubleshooting and tips
- Installing new software
- Date or time of the Pocket PC is incorrect
- The display of the Pocket PC remains dark
- The information on the display of the Pocket PC is difficult to read
- The Pocket PC switches off
- The Pocket PC does not start after switch on
- The Pocket PC stops working
- The battery discharges too quickly
- The Suspend button does not respond properly
- No sound or minimal volume
- Contact with hotline/help desk
- Technical data
- Index
Configuring Pocket LOOX 610
50 A26391-K139-Z120-1-7619
Permitting sound only for certain actions
Ê Touch Start.
Ê Select the Settings entry in the menu.
Ê Select the Personal tab.
Ê Touch the Sounds & Messages symbol.
Under the heading Activate sound for you will find a list of actions that are usually assigned acoustic
signals. You can select yourself which applications or functions are to be accompanied by sounds.
Ê Touch in an empty control and selection box to mark it.
Ê Touch in a marked control and selection box to remove the marking.
Ê Touch OK (navigation bar) to confirm your setting.
Configuring hardware buttons
FSC KeyLock: preventing switch-on via application buttons
By default, your Pocket LOOX 610 starts up if the Suspend button and an application button are
pressed.
In the program FSC KeyLock you can specify that the Pocket PC only starts if the Suspend button is
pressed.
Ê Touch Start.
Ê Select the Settings entry in the menu.
Ê Touch the Buttons symbol on the Private tab.
Ê Select the FSC KeyLock tab.
Ê Mark the Application buttons locked option.
You will find further information in the help file on your Pocket LOOX 610.
Assigning chosen functions to the hardware buttons
The buttons of your Pocket PC are assigned certain functions such as running programs. However,
you can change these default settings and assign the buttons the functions of your choice.
Ê Touch Start.
Ê Select the Settings entry in the menu.
Ê Touch the Buttons symbol on the Private tab.
A list of the hardware buttons and the assigned programs or functions appears. The four application
buttons appear in the list twice. This is because you can assign different applications to these
buttons for short and for long keystrokes.
Ê Mark the button in the list for which you want to change the assignment.
Ê Select the program you want to assign to this button from the list below it.
Ê Touch OK (navigation bar) to confirm your setting.