User Manual
Table Of Contents
- Title
- Contents
- May I introduce myself?
- Information before you start
- Software overview
- Operating pocket LOOX 610
- Overview of operating elements and connections
- Initial start-up
- Switching Pocket PC off and on
- Using standard operating elements
- Adjusting display lighting
- Making sound recordings
- Using the cradle
- Synchronising data with ActiveSync
- Backing up data with FSC Backup
- Panning instead of scrolling with FSC Panning
- Inserting and removing expansion cards
- Pocket LOOX 610 in mobile use
- FSC SpeedMenu - Operating pocket LOOX 610 quickly with one hand
- Configuring Pocket LOOX 610
- Connecting and networking Pocket LOOX 610 with other devices
- Accessories and additional components
- Troubleshooting and tips
- Installing new software
- Date or time of the Pocket PC is incorrect
- The display of the Pocket PC remains dark
- The information on the display of the Pocket PC is difficult to read
- The Pocket PC switches off
- The Pocket PC does not start after switch on
- The Pocket PC stops working
- The battery discharges too quickly
- The Suspend button does not respond properly
- No sound or minimal volume
- Contact with hotline/help desk
- Technical data
- Index
Configuring Pocket LOOX 610
A26391-K139-Z120-1-7619 49
Switching off display lighting
In the system settings, you can specify the time in minutes after which the display lighting is
switched off if no entry is made.
Ê Touch Start.
Ê Select the Settings entry in the menu.
Ê Select the System tab.
Ê Touch the Brightness symbol.
Ê Select after how many minutes without action the display lighting is to be switched off during
battery operation.
To save energy, we advise you to keep the time until automatic switch-off for battery operation very
short.
Reducing brightness
Ê Touch Start.
Ê Select the Settings entry in the menu.
Ê Select the System tab.
Ê Touch the Brightness symbol.
Here you can adjust the display brightness separately for operation with an electrical outlet and for
battery operation.
Ê Touch OK (navigation bar) to confirm your setting.
Switching off sound
Ê Touch the loudspeaker symbol in the navigation bar (to the left of the time).
A popup window for the loudspeaker settings appears.
Ê Mark the selection field for Off with the stylus.
Adjusting volume
Ê Touch the loudspeaker symbol in the navigation bar.
A popup window for the loudspeaker settings appears.
Ê Set the desired volume on the slide control with the stylus.
or
Ê Touch Start.
Ê Select the Settings entry in the menu.
Ê Select the Personal tab.
Ê Touch the Sounds & Messages symbol.
Ê Set the desired volume with the slide control.
Ê Touch OK (navigation bar) to confirm your setting.