User Manual

Configuring Pocket LOOX 610
48 A26391-K139-Z120-1-7619
However, if the Pocket PC is still not connected to the mains power during this period, all data that
is only in RAM (such as documents, additionally installed programs, personal settings) will be lost.
In other words, your Pocket PC is reset to the delivery state.
Using energy-saving functions
You can save energy in several ways to optimally utilise the battery charging time:
− Switch the Pocket PC into the Suspend mode when not in use.
− Reduce the processor speed.
− Switch the display lighting off or reduce the brightness.
− Switch off the sound, reduce the volume or only allow acoustic signals for certain
applications.
Switching Pocket LOOX 610 into Suspend mode
In the system settings you can specify after how many minutes without action the Pocket PC
switches into the Suspend mode
Ê Touch Start.
Ê Select the Settings entry in the menu.
Ê Select the System tab.
Ê Tap the symbol Power.
Ê Select after how many minutes without action the Pocket PC is to switch into the Suspend
mode.
The desired settings are made separately for battery operation and with a power outlet.
i
If you set the Pocket PC to switch off automatically, you can continue at the point at which
you interrupted your work by briefly pressing the Suspend button.
Reduce the processor clock speed (energy saving mode)
The energy saving mode with its reduced processor clock speed is adequate for many applications.
The battery uses less energy at a lower processor speed, enabling you to work longer during battery
operation. But if you wish to view films on your Pocket LOOX 610, you should select the turbo mode
with its high energy consumption.
Ê Touch Start.
Ê Select the Settings entry in the menu.
Ê Select the System tab.
Ê Touch the CPU Setting symbol.
Ê Mark the Energy saving mode option.
You can also mark the Automatic Power Saving option. Your Pocket PC then takes over the job of
selecting the most suitable mode and the most favourable processor clock speed.